Table of Contents
Advertisement
7
7
Select the connection settings, and check that the PServer you
created is listed in the active connections section.
[Enable NetWare] [*]
[Frame Type] [*]
[Print Server Name]
[NDS Context Name]
[Print Server Password]
[Password Retype]
[Preferred File Server]
[Preferred NDS Tree]
[Print Queue Scan Rate]
[*]
[Connection Mode]
[Mode] [*]
* If changes are made to settings marked with "*", turn the machine off, then on again.
Setting Up NetWare 4.x/ 5.x/ 6 Remote Printer Mode
1
Log in with administrator privileges.
2
Start up NWadmin.
3
Select the print service system or category container, and then select
"Print service quick setup" from the Tool menu.
4
Enter settings into the
name, and
under
Note
Specify the users who can use the queue, printer options, number
of queues, and password. Refer to the NetWare documentation for
details.
7-10
NDS
Enable (Enabled if check box is selected.)
Auto detect (Select the frame type suitable for your network
environment.)
Manually enter the name of the print server created in step 4.
The context name for the
Pserver
(Only specify this setting if it is also set on the NetWare server.)
(Only specify this setting if it is also set on the NetWare server.)
No settings required
The tree name for Pserver
login
1 (Change as necessary.)
Directory Services
PServer
Print server
Volume name
Type
name, and then save the settings.
Connecting the Computer and Copier
Bindery
No settings required
The file server name for the
Pserver
No settings required
Bindery
name,
Printer
boxes, select
Remote
name,
Print queue
parallel,
LPT1
KN-419
Advertisement
Table of Contents
