Initializing A Memory Card - JVC GR-DVL915 Instructions Manual

36
EN
MENU/BRIGHT Wheel
Power Switch
VIDEO/DSC Switch (Open the
LCD monitor to access this switch)
Display
I NDEX
PROTEC T
DELE E T
DPOF
FORM AT CANCEL
EXECUTE
RETUR N
FO MAT R
FO MAT R – CANCEL
EXECUTE
ERASE AL L
EX ST I NG I DATA?
Lock Button
Menu Screen
D.S.C. PLAYBACK

Initializing A Memory Card

You can initialize a memory card anytime.
After initializing, all images and data stored in the
memory card, including those which have been
protected, are cleared.
1
Set the VIDEO/DSC Switch to "
Power Switch to "
Lock Button.
•A stored image is displayed.
2
Press the MENU/BRIGHT wheel in. The Menu
Screen appears. Rotate the MENU/BRIGHT wheel to
select " MEMORY" and press it. The MEMORY
Menu appears.
3
Rotate the MENU/BRIGHT wheel to select
"FORMAT" and press it. The Confirmation Screen
appears.
4
Rotate the MENU/BRIGHT wheel to select
"EXECUTE" and press it. The memory card is
initialized. When initialization is finished, "NO
IMAGES STORED" appears.
•To cancel initialization, rotate the MENU/BRIGHT
wheel to select "CANCEL" and press it.
CAUTION:
Do not perform any other operation (such as turning
off the camcorder) during initialization. Also, be sure
to use the provided AC Adapter, as the memory card
may be corrupted if the battery becomes exhausted
during initialization. If the memory card becomes
corrupted initialize it.
(cont.)
", then set the
" while pressing down the