Recording Mode Setting - JVC GR-DVL915 Instructions Manual

MENU/BRIGHT Wheel
Power Lamp
Lock Button
Power Switch
Display
REC MODE – SP
LP
GR-DVL915/DVL815/
DVL510 only

Recording Mode Setting

Set the tape recording mode depending on your preference.
1
2
3
4
Menu Screen
Sub Menu
NOTES:
● If the recording mode is switched during recording, the
● It is recommended that tapes recorded in the LP mode
● During playback of a tape recorded on another
Set the Power Switch to "
the Lock Button located on the switch. The power
lamp lights and the camcorder is turned on.
Press the MENU/BRIGHT wheel in. The Menu
Screen appears.
Rotate the MENU/BRIGHT wheel to select
" CAMERA" and press it. The CAMERA Menu
appears.
Rotate the MENU/BRIGHT wheel to select "REC
MODE" and press it. The Sub Menu appears. Select
"SP" or "LP" by rotating the MENU/BRIGHT wheel
and press it. Rotate the MENU/BRIGHT wheel to
select "1RETURN", and press it twice. The Menu
Screen closes.
•Audio Dubbing (
( pg. 67) are impossible on a tape recorded in the
LP mode.
•"LP" (Long Play) is more economical, providing
1.5 times the recording time.
playback picture will be blurred at the switching point.
on this camcorder be played back on this camcorder.
camcorder, blocks of noise may appear or there may be
momentary pauses in the sound.
EN
" while pressing down
pg. 66) and Insert Editing
13