ProForm 610RT PFTL06711.0 User Manual page 12

10. Set the console assembly on the Left and Right
Uprights (82, 83). Be careful not to pinch any
wires. Insert the excess wire into the Right
Upright.
Start two 5/16" x 3/4" Screws (5) with two 5/16"
Star Washers (9) into the Right Upright (83).
Then start a 5/16" x 1 1/2" Bolt (4) into the Right
Upright.
Repeat this step on the left side of the tread-
mill. Then, firmly tighten all four 5/16" x 3/4"
Screws (5) and both 5/16" x 1 1/2" Bolts (4).
11. See steps 4 and 5. Tighten all Screws used in
these steps.
Attach the Left Accessory Tray (101) and the
Right Accessory Tray (104) to the console as-
sembly with eight #8 x 1/2" Screws (1).
10
Console
Assembly
4
9
83
11
Console
Assembly
104
1
1
12
5
5
82
101
1
1
4
9