Solving Problems With The Remote Control - Epson PowerLite S8+ User Manual

There is no sound, or the sound is not loud enough.
■ Use the buttons to adjust the volume (see page 54), or
Volume
adjust the
Volume
Make sure A/V Mute is not enabled. (Press the
■
to disable it.)
If your presentation includes computer audio, make sure the
■
volume control on your computer is not turned all the way down
or muted. In Windows, you may be able to check this by clicking
the volume control in your Windows system tray (lower right
corner of the screen). On a Mac, you may be able to adjust the
volume from your menu bar (top right corner of the screen) or via
the volume control function keys.
If you're using a DVD player or other video source, make sure the
■
cables are connected correctly, as described on page 35.
Solving Problems With the Remote
Control
The projector doesn't respond to remote control commands.
Point the remote control towards the projector's receiver. Make
■
sure you are within 19.7 feet (6 meters) of the projector and
within a 30° horizontal angle and a 15° vertical angle from the
projector's front or back receiver.
The remote control's batteries may not be installed correctly or
■
may be low on power. To change the batteries, see page 84.
Dim the room lights and turn off any fluorescent lights. Make
■
sure the projector is not in direct sunlight. Strong lighting,
especially fluorescent lights, may affect the projector's infrared
receivers. Also, turn off any nearby equipment that emits infrared
energy, such as a radiant room heater.
■ If any buttons are held for longer than 30 seconds, the remote
enters sleep mode. Release any button that is held to wake the
remote.
setting in the Settings menu.
button
A/V Mute
Solving Problems
97