Connecting A Component Video Source - Epson PowerLite S8+ User Manual

Connecting a Component Video Source

If your video equipment has component video connectors (three
connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can purchase a
component-to-VGA video cable from an Epson authorized reseller
(see page 16) or an electronics dealer.
1. Connect the component end of the cable (3 male RCA) to the
Y/Cb/Cr (or Y/Pb/Pr) connectors on your player.
2. Connect the other end of the cable (HD15 male) to the
Computer (Component Video)
optional component-to-VGA video cable or adapter.
PowerLite S8+
EX51/
PowerLite W8+
3. You may need to change the
projector's Signal menu to
4. If you want to play sound through the projector, see page 35 for
instructions on connecting an audio cable.
port on your projector using an
Computer (Component
Video) port
Computer (Component
Video) port
setting in the
Input Signal
(see page 66).
Auto
Setting Up the Projector
33