Table of Contents
Advertisement
Using the Configuration Utility
SECURITY
If an additional
measure of security is
desired on the
wireless network,
WEP (Wired
Equivalent Privacy)
encryption can be
enabled.
• Select Enable to
activate encryption.
• Select 64 Bit or
128 Bit WEP Key
Length
• Select WEP Key
Type: Character
or Hexadecimal
• Select
Authentication
Type: Open,
Shared or Auto
Please note that all
devices must share the
same Encryption
settings to
communicate on the
network.
Input 4 different Key
Settings in the fields provided.
• For 64 Bit WEP encryption, you may enter 5 characters in the range of
a-z and 0-9 (for example: MyKey); or a 10 digit hexadecimal value in the
range A-F, a-f, and 0-9. (For example: 11AA22BB33).
• For 128 Bit WEP encryption, you will enter 13 characters in the range of
a-z, A-Z and 0-9 (for example: MyKey12345678); or a 26 digit
hexadecimal number for 128-bit encryption. If the number is entered
incorrectly the function will not work.
Advertisement
Table of Contents
