Planar SL3250 User Manual page 13

AC IN
1
AC power input.
MAIN POWER SWITCH
2
Main power on/off switch.
HDMI IN
3
HDMI video/audio input.
DVI IN
4
DVI-D video input.
RJ-45
5
LAN control function for the use of remote control signal from control center.
VGA IN (D-Sub)
6
VGA video input.
COMPONENT IN (RCA)
7
Component YPbPr video source input.
AUDIO IN (RCA)
8
Audio input from external AV device.
AUDIO OUT (RCA)
9
Audio signal output to connect your external AV device.
AUDIO IN (3.5mm)
10
Audio input from your PC.
SPDIF OUT
11
Digital audio signal output to connect your external AV device.
IR OUT / IR IN (3.5 mm)
12 13
IR signal output/input for the loop-through function.
NOTES:
• This display's remote control sensor will stop working if the jack [IR IN] is connected.
• To remotely control your A/V device via this display, refer to page 13 for IR Pass Through connection.
RS232C OUT / RS232C IN (2.5 mm)
14 15
RS232C network output/input for the loop-through function.
USB PORT
16
Connect your USB storage device.
Simplicity Series
7