Planar SL3250 User Manual page 11

[ ] button
1
Press to switch the display on or off.
[ ] button
2
Press to select input source.
[ ] button
3
Press to access the OSD menu.
[ ] button
4
Press to move the highlight bar right to selected item while OSD menu is on.
[ ] button
5
Press to move the highlight bar left to deselected item while OSD menu is on.
[ ] button
6
Press to move the highlight bar up or increase the adjustment while OSD menu is on, or to increase the audio output level while OSD
menu is off.
[ ] button
7
Press to move the highlight bar down or decrease the adjustment while OSD menu is on, or to decrease the audio output level while
OSD menu is off.
Remote control sensor and power status indicator
8
• Receives command signals from the remote control.
- Light off when the display is turned on
- Lights red when this display is in standby mode
- Lights off when the main power of this display is turned off
Simplicity Series
5