Belkin F5D7231uk4P User Manual page 108

High-speed mode wireless g router with built-in usb print server
Table of Contents

Advertisement

Manually Configuring Computer Network Settings
4.
Select the "TCP/IP" tab (3). Next to "Configure" (4), you should
see "Manually" or "Using DHCP". If you do not, check the
PPPoE tab (5) to make sure that "Connect using PPPoE" is NOT
selected. If it is, you will need to configure your Router for a
PPPoE connection type using your user name and password.
5.
If "Manually" is selected, your Router will need to be set up
for a static IP connection type. Write the address information
in the table below. You will need to enter this information into
the Router.
6.
If not already selected, select "Using DHCP" next to "Configure"
(4), then click "Apply Now".
Your network adapter(s) are now configured for use with the Router.
106
106

Advertisement

Table of Contents
loading

Table of Contents