What To Do If; Installation - AEG BC3000001M User Manual

WHAT TO DO IF...

WARNING!
Refer to "Safety information" chapter.
Problem
The oven does not heat up
The oven does not heat up
The oven lamp does not oper-
ate
Steam and condensation settle
on the food and in the oven
cavity
If you cannot find a solution to the problem yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the
front frame of the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

INSTALLATION

WARNING!
Refer to "Safety information" chapter.
The built-in unit must meet the stability requirements of DIN 68930.
The oven is not switched on
The fuse in the fuse box is re-
leased
The oven lamp is defective
You left the dish in the oven
for too long
min.
3 mm
Possible cause
.........................................
.........................................
.........................................
What to do if...
Remedy
Switch on the oven (refer to
chapter "Daily use").
Control the fuse. If the fuse is
released more than one time,
refer to a qualified electrician.
Replace the oven lamp
Do not leave the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking process
ends
23