Advertisement
Quick Links
Assembly guide
Component parts
1 x Frame (A)
4 x wine bottle shelves (C) for item 541.94.211 & 541.94.223
2 x Runners (B)
PLEASE NOTE: For minimum installation cabinet width 450 mm and depth 495 mm
82 74
178
74
Front edge of carcase
459
604
82 74
178
74
6 x wine bottle shelves (C) for item 541.94.213
1 x wine glass shelf (D) for item 541.94.223
58
(Hole centre distance)
(For item 541.94.211)
(For item 541.94.213 & 541.94.223)
Overall frame height 480/625
58
(Hole centre distance)
Tel: 01788 542020, Fax: 01788 544440, E-Mail: info@hafele.co.uk
Tools required (Not Supplied)
Spirit Level
Pencil
Did you know Häfele also supply tools to the trade and industry?
See www.hafele.co.uk for more information.
•
•
•
•
•
•
•
locking washer (F)
1 x Handle (E)
4 x Spacers (I)
16 x M4 x 30 mm
Pan head screw (H)
Hexagon nuts (G)
1
Using the runner drilling pattern (shown left), fix
the spacers (I) and the runners (B) to the inside
face of the cabinet, using 16 x M4 x 30 mm pan
head screws (H) at floor level of cabinet.
Sales and Technical Support -
Pull-out wine rack:
Bradawl
Cross Head Screwdriver
Make sure all the components are included before
you start.
The number for technical support is at the bottom
of the page.
Dont rush!
Read the instructions first.
Assemble in the stages shown.
Keep the fittings together to avoid loss.
Have fun.
4 x M6
580
3 x M6
495
Minimum Dimensions
FITT-10080
Issue - 01
Tape measure
450
Advertisement
Related Manuals for Häfele FITT-10080
Summary of Contents for Häfele FITT-10080
- Page 1 FITT-10080 Issue - 01 Assembly guide Pull-out wine rack: Tools required (Not Supplied) Component parts Spirit Level Bradawl Tape measure Pencil Cross Head Screwdriver Did you know Häfele also supply tools to the trade and industry? See www.hafele.co.uk for more information.
- Page 2 Assembly guide Pull-out wine rack: Steps 2 to 4 Assemble wine bottle shelves (C) to the frame (A). To do so tilt 90º so Attach the frame (A) to the runners (B) with the 2 threaded bolts that the front side of wine shelf faces upwards towards top of cabinet. on each of the runners going through the matching holes on Insert both ends on to the corresponding holes;...