Nikkai A31JL Owner's Manual page 6

TRANSMITTER
3.5mm stereo plug (4 pole)
to scart plug cable
Power
adapter
IR Header ￡ ¨Place To IR Window Of Sattllite Receiver ￡ ?
TV ANT IN
75 OHM Satellite Coaxial Cable
(must be purchased)
TV
A/V IN
RF IN
SCART CONNECTOR A/V CABLE
Fig. 2a
TRANSMITTER
3.5mm stereo plug (4 pole)
to scart plug cable
Power
adapter
IR Header ￡ ¨Place To IR Window Of Sattllite Receiver ￡ ?
TV ANT IN
75 OHM Satellite Coaxial Cable
(must be purchased)
TV
A/V IN
RF IN
SCART CONNECTOR A/V CABLE
Fig. 2b
9
YELLOW RED WHITE
SCART/RCA Adapter
(Not Included)
SATELLITE RECEIVER
OUT 1
LET
IN
SATELLITE
RF
IN
2
OUT
AC POWER
OUT
SATELLITE RECEIVER
OUT 1
LET
IN
SATELLITE
RF
IN
OUT 2
AC POWER
OUT
■ How To Receive Wireless Audio/Video Signals on Your TV
There are two ways to receiver wireless audio/video signals on your remote
TV (TV in another location such as in bedroom, kitchen).
· Connect the receiver directly to the remote TV.
· Connect the receiver to a VCR, which is then connected to the TV.
If your TV has picture-in-picture capabilities, you can view any image
transmitted by sender, such as your sleeping baby, in a small inset picture
while enjoying other programming on the rest of the screen. Consult the
owner's manual of your TV for instructions on using these capabilities.
Connecting Receiver Directly to Remote TV
Connect TV and receiver with RCA cable, just plug RCA plugs to receiver
RCA sockets.
If your TV has only SCART socket for audio/video input, you can use a
SCART/RCA adapter (not included) to connect the RCA plug of the
transmitter and the SCART socket of TV. Please follow the instruction figure
below.
RECEIVER
Power
adapter
Fig. 3a
RECEIVER
Power
adapter
3.5mm stereo plug (4 pole) to SCART plug cable
A /V
WHITE
IN
RF
RED
IN
YELLOW
3.5mm stereo plug (4 pole) to 3RCA plug cable
A /V
IN
RF
IN
Fig. 3b
10