Advertisement
Press LOCAL to cancel remote (REM on) when the
instrument is used over the IEEE-488 bus. LOCAL
will be locked out when the bus LLO command is in
effect.
FACTORY DEFAULT CONDITIONS
Description
Range
Reading relative
Analog Filter
Digital Filter
Buffer
Analog Output
Primary Address
Integration Period
Display Resolution 6 1/2 digits
Trigger Mode
Trigger Source
Trigger Interval
Trigger Delay
Calibration Lock
NOTE: All listed operating states except buffer status, primary address,
and calibration lock status can be saved as user configuration using
MENU save user setup selection. Primary address can be saved using
MENU SET IEEE ADDRESS selection.
Default State
30V, auto-range off
Off, value =0V
Off
On, medium response
Off, size = 0000 (wrap around)
Relative off, value: 0V, gain: 1.0,
normal output, source value
= 0V
7
Line cycle (16.67msec @ 60Hz,
20msec @ 50Hz)
Multiple
External (MANUAL key also
operative)
0.25sec
0sec
On (calibration locked)
11
Advertisement
