Advertisement
SELECTION
Use
or
CALL selections. Press ENTER to choose displayed
selection and move down one menu level (where ap-
plicable). Press ESC to cancel displayed selection and
move up one menu level (where applicable).
Use MENU to access operating modes summarized
below.
MENU Message
FILTER
INTEGRATION
TIME
DISPLAY
RESOLUTION
READING REL
OUTPUT
SETUP
SET IEEE
ADDRESS
CALIBRATE
10
to scroll through MENU, SETUP, and RE-
Description
Set digital filter response,
analog filter on/off
Set A/D integration period
(3msec, line cycle, or
100msec)
Set display resolution to
3 1/2, 4 1/2, 5 1/2, or 6 1/2
digits
Program reading relative value
Set analog output gain and
relative value
Save user setup, recall user or
factory default setup
Select IEEE-488 primary
address (0-30)
Display test, calibrate Model
182, configure analog output
for normal or source
Advertisement
