Machine Components; Machine Setup - KleenRite MegaXL 36306 Operator And Parts Manual

OPERATION

MACHINE COMPONENTS

6
1
8
1. Vacuum Inlet
2. Power Cords
3. Discharge Connector
4. Manual Drain
5. 10" Wheels
6. Vacuum Lid

MACHINE SETUP

1. Connect hoses and tool to be used. Attach the
supplied 1 1/2" hose to the connector on the back
of the machine (Figure 1).
Fig. 1
2. Look inside recovery tank and be certain that
submersible pump is securely held in place by the
bracket on the bottom of the tank. Confirm that
the white hose coming from the pump is attached
to the clear check valve Figure 2). Also be certain
that no debris is obstructing the inlet holes at the
base of the pump
36306 & 36306CETL(8-16)
2
7
7. Handle
8. Tank Latch
9. Separate Circuit Indicator Light
10. Discharge Pump Switch
11. Vacuum #1 Switch
12. Vacuum #2 Switch
WARNING: Do not vacuum up flammable
materials as they could cause an explosion or
fire.
AVERTISSIMENT: N'aspirez pas des
matériaux inflammables comme ils pourraient
causer une explosion ou un incendie.
3. Plug machine's power cords into GFCI wall
outlets on separate circuits. Green circuit
indicator light on switch panel illuminated
confirms connection to separate circuits. (Figure
3). Lock front wheels (Canada only) (Figure 4).
9
10
3
4
Fig. 2
12
11
5
7