Page 1
Operator and Parts Manual Model No.: 36306 – 15 gal Extractor 36306CETL (Canada) CAUTION: Read the instruction manual before using the appliance. KLEENRITE 1122 MAPLE STREET MADERA CA 93637 U.S.A. MNL36306 & MNL36306CETL FAX: 1-559-673-5725 Rev. 01 (8-16) CUSTOMER SERVICE: 1-800-241-4865...
Page 2
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. This machine is for commercial use. To reduce the risk of fire, electric shock, or injury: WARNING: Do not operate machine unless trained and authorized.
Page 3
CONSIGNES DE SÉCURITÉ IMPORTANTES L’utilisation d’un appareil électrique demande certaines précautions: LIRE TOUTES LES INSTRUCTIONS AVANT D'UTILISER CETTE MACHINE. Cette machine est pour un usage commercial. Pour réduire le risque d'incendie, d'électrocution AVERTISSIMENT: ou de blessures : N'utilisez pas la machine à moins formés et habilités. Se connecter à...
OPERATION 3. When using machine: SAFETY PRECAUTIONS – Do not run machine over cord. – Do not pull machine by plug or cord. – This machine is intended for commercial use. It is Do not pull cord around sharp edges or designed to extract water from carpet and hard corners.
Page 6
OPERATION grounding connector and grounding plug. The GROUNDING INSTRUCTIONS plug must be plugged into a GFCI outlet that is Machine must be grounded. If it should properly installed in accordance with all local malfunction or breakdown, grounding provides a codes and ordinances. Do not remove ground pin; path of least resistance for electrical current to if missing, replace plug before use.
OPERATION ATTENTION: Excessive foam buildup will not activate the float shut-off screen. ATTENTION: Discharge pump will not pump foam. Use a defoamer. USING THE MEGAXL WITH WEIGHTED EXTRACTION TOOL Fig. 3 Fig. 4 1. If using a weighted extraction tool with the 4.
OPERATION MACHINE MAINTENANCE To keep machine in good working condition simple follow machine’s daily, weekly, and monthly maintenance procedures. For Safety: When servicing machine, unplug cord from wall outlet. DAILY MAINTENANCE (Every 4 hours of Operation Fig. 12 1. Empty and rinse out recovery tank thoroughly. 8.
OPERATION RECOMMENDED STOCK ITEMS MONTHLY MAINTENANCE (Every 80 hours of operation 1. Lubricate wheels with water resistant oil. Refer to Parts List section for recommended stock items. Stock items are clearly identified with a bullet 2. Inspect machine for water leaks and loose preceding the part number.
OPERATION SPECIFICATIONS Model 36306 & 36306CETL LENGTH 787 mm (31 in) WIDTH 470 mm (18.5 in) HEIGHT 991 mm (39 in) WEIGHT 54.9 Kg (121lbs) RECOVERY TANK CAPACITY 56.7 L (15 gal) DISCHARGE PUMP 120 V, 238 LPM (63 GPM), 5.1 A VACUUM MOTORS 2 @ 120 V, 12.5 A, 1500 W SEALED WATER LIFT...
PARTS LIST 36306 & 36306CETL GROUP ONE A 50’ extension pump out hose is available. Part #SE-10.7/50EXT Part # Description Part # Description B-26.7 10-32 X 1 1/2 PHXZINC C-95 VELCRO, ONE WRAP STRAP 1/2" X 12" B-40.91 3/8-16 X 1 1/2 HEX ZINC E-11.5/50 HOSE, 1 1/2"...
Page 14
PARTS LIST 36306 & 36306CETL BASE GROUP 36306 & 36306CETL(8-16)
Page 15
PARTS LIST 36306 & 36306CETL BASE GROUP Part # Description Qty. Part # Description Qty. B-10 6-32 X 1/2 PHXSS C-51 MUFFLER, FOAM EDGE B-10 6-32 X 1/2 PHXSS C-59 PUSHNUT FASTNER, 1/2 CAP B-14 NUT 6-32 HEX SS G-37.5FOAM VALVE,VAC SHUT OFF DUAL 2 FOAM B-14 NUT 6-32 HEX SS...
Page 16
PARTS LIST 36306 & 36306CETL TANK GROUP 36306 & 36306CETL(8-16)
Page 17
PARTS LIST 36306& 36306CETL TANK GROUP Part # Description Qty. Part # Description Qty. B-11.2 6-32 X 3/4 FHXSS 100 DEG D-29.6A BODY SS,1/4-32THD INLINE FILTER B-12.5 6-32 X 1 1/4 PHXSS D-94.25 VALVE, CHECK 1-1/2 CLEAR PVC B-14.5 NUT 6-32 HEX SS NYLOK J-41MEGAXL/EXTRACT TANK, GRAY ROTO MEGA XL EXTRA B-16.2...
Page 18
PARTS LIST 36306 & 36306CETL HANDLE GROUP Part # Description Part # Description B-09.1 6-32 X 3/8 PHXSS K-21W SWITCH, SPST WATER RESIS B-14.5 NUT 6-32 HEX SS NYLOK K-28.05 TIE, WIRE NYLON #10 SCREW B-21 10-32 X 5/16 PHXSS M-0792.13 PLATE,HANDLE SW COVR MEGA X B-23...
Kleenrite can inspect the part that is suspected to be faulty or have a chance to repair it, Kleenrite will ship the requested part on a COD basis (part plus freight) or if credit has been established prior to the request the part will be shipped on an Open Account basis (part plus freight).
Page 20
Kleenrite’s control. In no event shall Kleenrite be liable for loss of use, incidental or consequential damages or any damages to persons or property.
Page 21
Kleenrite’s control. In no event shall Kleenrite be liable for loss of use, incidental or consequential damages or any damages to persons or property.