Table of Contents
Advertisement
Installing the Lower Housing Assembly (cont'd)
3. Securely attach plugs from motor to sockets on Downlight
Socket Plate Assembly (Figure 3)
4. Securely attach Downlight Socket Plate Assembly to
the Adapter Plate by tightening three screws with spring
washers (
5
/
-32 x 7 mm) provided with the fan.
32
(Figure 4)
INSTALLATION NOTE
Be sure to line up the curved slotted holes located on
both Lower Housing Support Plates. (Figures 4 & 5)
5. Install three Candelabra Bulbs (not included - 40 watts
max) in each of the sockets on the Downlight Socket Plate
Assembly. (Figure 5)
IMPORTANT
40 watt bulbs are the maximum wattage allowed to safely
operate the fan.
6. Securely attach Lower Glass by twisting onto the Adapter
Plate. Don't overtighten or force it. (Figure 6)
7. You have now completed the assembly of your ceiling
fan. Restore electrical power.
9
Figure 3
Figure 4
Figure 5
Figure 6
Advertisement
Table of Contents
