Installer Setup - Honeywell Tradeline Chronotherm IV Installation Instructions Manual

T8611G CHRONOTHERM
INCREASE TIME SETTING
OR SCROLL FORWARD
THROUGH INSTALLER
SETUP AND SELF-TEST
SET CURRENT
DAY AND TIME
RETURN TO
NORMAL
OPERATIONS
ENTER
INDEFINITE
OR TIMED
HOLD MODE
SET CURRENT OR
PROGRAM DAY
CHANGE BETWEEN
DAYLIGHT SAVINGS
AND STANDARD TIME
COPY ONE PROGRAMMED
DAY TO ANOTHER DAY
Time
Run
Set Current
Wake
Program Day/Time
Heat/Cool
Hold Temp Day
Settings
Daylight
Copy
Time
Fig. 7. T8611G System and Fan key locations.
TWO LED
INDICATORS
Fig. 8. LEDs location.
69-0936—1
®
IV DELUXE PROGRAMMABLE HEAT PUMP THERMOSTATS
SET WAKE TIMES
AND SETPOINTS
Set Current
Run
Day/Time
Program
Hold Temp
Day
Daylight
Time
Fig. 6. T8611G key locations and descriptions.
Set Program
Leave Return Sleep
System Fan
M15042
M10675
SET LEAVE TIMES
AND SETPOINTS
SET RETURN TIMES
AND SETPOINTS
Time Set Program
Wake Leave Return
Heat/Cool
System
Settings
Copy
DECREASE TIME SETTING
OR SCROLL BACKWARD
THROUGH INSTALLER
SETUP AND SELF-TEST
Period
Wake
System
Leave
Fan
Return
Sleep

INSTALLER SETUP

NOTE: For most applications, the thermostat factory-
settings will not need to be changed. Review the
factory settings in Table 2 and if no changes are
necessary, go to the Installer System-Test
section.
The Installer Setup is used to customize the thermostat
to specific systems. Some of the options include
temperature display, changeover and outdoor
temperature display. Installer Setup numbers are listed in
Table 3. The table includes all the configuration options
and the factory-settings for the T8611.
4
INCREASE TEMPERATURE
SETTING OR SCROLL
FORWARD THROUGH
INSTALLER SETUP OPTIONS
DECREASE TEMPERATURE
SETTING OR SCROLL
BACKWARD THROUGH
INSTALLER SETUP OPTIONS
DISPLAY INFORMATION
SUCH AS PRESENT
SETTINGS AND OUTDOOR
TEMPERATURE
SET SLEEP
TIMES AND
SETPOINTS
Sleep
SELECT FAN
OPERATION
Fan
SELECT SYSTEM
OPERATION
CHANGE BETWEEN
HEATING AND COOLING
SETPOINTS
Table 2. Default Program Settings.
Heat
Time Setpoint
6:00 AM 70°F
(21°C)
8:00 AM 62°F
(16.5°C)
6:00 PM 70°F
(21°C)
10:00 PM 62°F
(16.5°C)
M10405
Cool Fan
Setpoint Setting
78°F Auto
(25.5°C)
85°F Auto
(29.5°C)
78°F Auto
(25.5°C)
82°F Auto
(28°C)