Brother MFC-J1205W Quick Setup Manual

MFC-J1205W
MFC-J1215W
EN FR
You must complete steps
1
1
Unpack the machine and check the components
Remove the protective tape or film covering the machine and the supplies.
* Use these inbox (starter) ink
cartridges for the initial installation.
2
Load plain Letter paper in the paper tray
Pull the paper tray completely
out of the machine, and then
open the output paper tray cover.
3
Connect the power cord and install the inbox (starter) ink cartridges
Connect the power cord.
4
Check the print quality
The machine prints the Print Quality Check
Sheet.
Connect your computer or mobile device to your machine
5
Follow these steps to complete the setup using one of the connection types available on your machine.
Visit setup.brother.com to download and install Brother
software.
setup.brother.com
Quick Setup Guide
Read the Product Safety Guide first, then read this guide for the correct installation procedure.
Brother recommends keeping this guide next to your Brother machine for quick reference.
Video setup instructions:
support.brother.com/videos
- to be able to use this machine.
5
Fan the paper well and load it in
the tray.
Open the ink cartridge cover.
OK
Check the print quality of the four color blocks on the
sheet.
Follow the on-screen instructions and prompts.
NOTE
For USB Connection, locate the USB port inside the
machine as shown.
The latest manuals are available at the Brother support website:
support.brother.com/manuals
Manuals in Spanish for this model are available at support.brother.com.
Manuales en Español para este modelo están disponibles en
support.brother.com.
NOTE
• The components included in the box may differ depending on your country.
• Save all packing materials and the box in case you must ship your machine.
• You must purchase the correct interface cable for the interface you want to use.
We recommend using a USB 2.0 cable (Type A/B) that is no more than 6 feet
(2 meters) long.
For more information about paper handling and sizes, see the Online User's Guide
at support.brother.com/manuals.
Adjust the paper guides.
Unpack and install the inbox
(starter) ink cartridges.
If the quality of any of the four color blocks is Poor (see the image on the
left), we strongly recommend cleaning the print head to improve the print
Poor quality.
See the Improve Print Quality section in this guide.
NOTE
To change the language of the sheet, see the Online User's Guide at
support.brother.com/manuals.
Close the output paper tray Pull out the paper support a, and
cover, and then slowly push the unfold the paper support flap b so
paper tray completely into the that the printed pages do not fall.
machine.
Close the ink cartridge cover. The machine will prepare the ink tube
system for printing.
Wait until the machine prints the Print Quality Check Sheet and go to
4 .
NOTE
The first time you install the ink cartridges, the machine will use
extra ink to fill the ink delivery tubes. This is a one-time process that
enables high-quality printing.
Setup Finished
You can now print and scan using your machine.
To check for the latest firmware, visit
support.brother.com/up7.
Important Notice for Network Security:
The default password to manage this machine's
settings is located on the back of the machine
and marked "Pwd". We recommend immediately
changing the default password to protect your
machine from unauthorized access.
D01U0K001-00
USA/CAN
Version 0
2
1