Table of Contents
Advertisement
AA68-03843A-00Eng_euro
4/21/06
Picture - Mode
◆ Mode: Dynamic/
Standard/Movie/Custom
You can select the type of
picture which best
corresponds to your viewing
requirements.
➢
You can select these
options simply by pressing the P.MODE button on
the remote control.
◆ Contrast/Brightness/Sharpness/Colour/
Tint(NTSC only)
The television has several settings which allow you to
control the picture quality.
◆ Colour Tone: Cool2/Cool1/Normal/Warm1/
Warm2
◆ Reset
You can return to the factory defaults.
The reset function is set for each mode (Dynamic,
Standard, Movie, or Custom).
Picture - Digital NR / Tilt
◆ Digital NR
If the signal received by the
television is weak, you can
activate this feature to
reduce any static and
ghosting that may appear on
the screen.
◆ Tilt (depending on the model)
If you find that the picture received is slightly tilted to one
side, you can adjust the tilt setting (-7 to +7).
All manuals and user guides at all-guides.com
12:27 PM
Page 6
Picture - PIP
You can display a sub picture within the main picture of TV
Mode
TV
programme or external A/V devices such as VCR or DVD. In
√ √
Mode
: Dynamic
Contrast
:
100
this way you can watch TV program or monitor the video
Brightness
:
50
Sharpness
:
75
input from any connected devices while watching TV or other
Colour
:
50
Tint
: G 50
R 50
video input.
√ √
Colour Tone : Cool1
√ √
Reset
TV
Move
Enter
Return
◆ PIP: On/Off
◆ Source
◆ Swap
◆ Size: Small/Large
◆ Position:
◆ Programme
Picture
TV
√ √
Mode
: Dynamic
Digital NR
: Off
√ √
Tilt
: 0
√ √
PIP
Easy functions of the remote control
Move
Enter
Exit
(depending on the model)
Picture
TV
√ √
Mode
: Dynamic
PIP
√ √
Digital NR
: Off
Source
Tilt
: 0
Swap
PIP
√ √
Size
Position
Programme
Move
Enter
Exit
Move
You can activate or deactivate the PIP funtion. 1 1
You can select a source of the sub-picture. 2 2
➢
Depending on the models, the sub-picture can be
viewed only when a source different from the main
picture's is selected. If a TV programme is viewed
on the main picture, the sub-picture is not available
for TV programmes. If a TV source is selected, the
message Not Available is displayed.
You can interchange the main picture and sub-picture. 3 3
You can select a size of the sub-picture.
/
/
/
You can select a position of the sub-picture.
You can select a channel of the sub-picture only when
the Source is set to TV.
You can freeze the sub-picture.
English - 6
Sound -
Mode / Equalizer /
Auto Volume / Pseudo Stereo /
Turbo Plus
◆ Mode: Standard/Music
PIP
/Movie/Speech/Custom
√ √
: On
You can select the type of
√ √
: TV
√ √
special sound effect to be
: Large
√ √
used when watching a given
√ √
:
√ √
: P 1
broadcast.
➢
You can select these
Enter
Return
options simply by pressing the S.MODE button on
the remote control.
◆ Equalizer
The television has several settings which allow you to
control the sound quality.
➢
If you make any changes to these settings, the
sound mode is automatically switched to Custom.
◆ Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is
low.
◆ Pseudo Stereo
This feature converts a monaural sound signal into two
identical left and right channels. Once the Pseudo
Stereo is set to On or Off, these settings apply to the
sound effects such as Standard, Music, Movie, and
Speech.
◆ Turbo Plus
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can
enjoy more magnificent and dynamic sound when
watching music, movie, or other channels.
➢
You can change the options simply by pressing the
TURBO button on the remote control.
Sound
TV
√ √
Mode
: Standard
√ √
Equalizer
√ √
Auto Volume
: Off
Pseudo Stereo
: Off
√ √
√ √
Turbo Plus
: Off
Move
Enter
Exit
Advertisement
Table of Contents
