Advertisement
OPERATION
Powering on / off
Plug the power cord into a socket and switch it on. Press "ON/OFF" on the control panel or
remote to turn the fan on. Press again to turn the fan off. Both the control panel and remote
can be used to control the fan.
Note:
To use the remote control, ensure the battery is fitted.
Speed
Press the "Speed increase" (+) and "Speed decrease" (–) buttons to adjust the fan speed.
Changes in the speed will be shown on the display. The fan features 12 different speeds.
Timer
The timer function allows the fan to automatically turn off after a pre-set number of hours.
Press the timer button to set the desired hours. Each press on the timer button increases
the time the fan will operate by 1 hour as seen on the display. The fan can be set to turn off
after 1-12 hours.
Swing
This fan features 3 swing settings.
• Pressing the swing button once will cause the fan to swing left and right.
• Pressing the swing button a second time will cause the fan to move up and down.
• Pressing the swing button a third time will cause the fan to both move left and right,
and up and down.
• Pressing the swing button a fourth time will cause the fan to stop swinging.
Swing direction - Left and right
Swing direction – Up and down
Advertisement
