BEFORE FIRST USE
Batteries for the remote control
1. Slide the back cover off the remote control.
2. Noting the polarity markings '+/–', insert two AAA batteries (not supplied) into the
remote control. Slide the back cover on.
OPERATION
Powering on/off
1. Plug the power cord into a socket, then turn the socket on.
2. Press the Power button on the remote control or control panel to turn on the fan.
3. Press the button again to turn off the fan.
Note:
To ensure adequate air circulation to the motor, keep vents at the rear of the
motor free of dust.