Table of Contents
Advertisement
PROCEDURE FOR RESETTING THE CAMERA
3. Procedure for Resetting the
Camera
Note: If your Camera is moved from one router (e.g. home) to another
(e.g. office) or you have Camera setup issues, then the Camera must
be reset. Please reset the Camera with the following procedures:
• Unplug power adapter to turn off the camera unit.
• Press and hold the PAIR button, and then plug in the adapter to
power up, please do not release PAIR button until you hear a long
beep tone, wait for the Camera Unit to complete an internal reset
procedure. The Red LED will begin to flash when the Camera Unit is
reset successfully.
• You can add your Camera again by following the steps in section
3.4.4.
14
Advertisement
Table of Contents
