Checking That Your Oven Is Operating Correctly; Setting The Time - Samsung ME6124ST-1 Owner's Instructions & Cooking Manual

CHECKING THAT YOUR OVEN IS OPERATING
CORRECTLY
The following simple procedure enables you to check that your oven is working correctly
at all times.
Open the oven door by pushing the push button on the bottom side of the control panel.
Place a glass of water on the turntable. Then, close the door.
1. Press the Number button to enter operating time.
(4 to 5 minutes)
2. Press the START button.
Result:
The oven must be plugged into an appropriate wall socket. The turntable must be
in position in the oven. If a power level other than the maximum is used, the water
takes longer to boil.
ME6124ST-1_ME6124W-1_XSA_DE68-04300A-04_EN.indd 14
The oven light comes on and the turntable starts
rotating.
1) Cooking starts and when it has finished the
oven beeps 4 times.
2) The end reminder signal will beep 1 times
(once every minute).
3) The current time is displayed again.

SETTING THE TIME

Your microwave oven has an inbuilt clock. When power is supplied, "12:00" is
automatically displayed on the display.
Please set the current time.
• When you first install your microwave oven
• After a power failure
Do not forget to reset the clock when you switch to and from summer and winter
time.
1. Press the Clock button.
2. Use the Number buttons to enter the current time.
You must press at least three numbers to set the clock. If
the current time is 5:00 enter 5, 0, 0.
3. Press the START button.
If there is a power interruption, you will need to reset the clock. You can check the
current time while cooking is in progress by pressing the Clock button.
You can change 24 or 12 hour notation.
1. Press the Clock button and Number 0 button for 1~3
seconds.
2. Press the Number 1 or 2 button.
1 : 12-hour notation and the display shows "12Hr"
2 : 24-hour notation and the display shows "24Hr"
3. Press the START button. The display returns to the time of
day.
English - 14
2018-08-13 11:40:22