Appendix D Regulatory Compliance; Overview - Extreme Networks Altitude 300-2 Hardware Installation Manual

Regulatory Compliance
D

Overview

The Altitude 300-2 wireless port is manufactured by Extreme Networks in three configurations,
characterized by regulatory domain. Each regulatory domain includes countries that share similar
regulatory requirements. Please refer to Table 9 for these regulatory domains and their corresponding
countries, or go to http://www.extremenetworks.com/go/rfcertification.htm for the latest list of
supported countries.
It is the responsibility of the end user to obtain the correct Altitude 300-2 for the local regulatory
domain of the country of installation and to configure the correct country code, if required. The end
user is also responsible to install the latest version of software made available by Extreme Networks to
ensure compliance with the country's requirements and restrictions. Since countries frequently open
new frequencies and change output power limits, maintain the latest software version to take advantage
of these improvements. Consult the appropriate Extreme Networks Software User Guide for detailed
instructions for installing and upgrading software.
The Altitude 300-2 must be used in strict accordance with manufacturer instructions as described in this
guide and in the ExtremeWare 7.4 User Guide. To determine if the Altitude A300-2 access point is allowed
to operate in a specific country, refer to the country listing in this appendix of go to
http://www.extremenetworks.com/go/rfcertification.htm for additional information or countries
added after this publication.
Extreme Networks is not responsible for any interference caused by unauthorized installations or
modifications of the device, or the substitution or attachment of connecting cables and equipment other
than specified by Extreme Networks. The correction of interference caused by such unauthorized
modification or installation or attachment is the responsibility of the user or installer. Extreme and its
authorized resellers or distributors are not liable for any damages or violation of government
regulations that may arise from the user and/or installer failing to comply with these guidelines.
NOTE
The Altitude 300-2 is configured and managed by the Extreme Networks switch connected to the
Altitude 300-2. Please consult the software manual of the Extreme Networks switch to properly
configure the Altitude 300-2 and to insure that the latest software is used.
Altitude 300-2 Getting Started Guide
The A300-2 is Wi-Fi certified for operation in accordance with IEEE 802.11a/b/g. The
regulatory domain of the purchased A300 and the country code selected during set-up
will determine the operational channels within the 5 GHz (a) and 2.4 GHz (b/g)
frequencies.
31