Electrical Safety - Rangemaster RDXD21 User Manual & Installation & Service Instructions

While carrying and positioning the appliance,
DO NOT damage the cooler gas circuit.
DO NOT store explosive substances such as
aerosol cans with a flammable propellant in
this appliance.
This appliance is intended to be used in
household and domestic applications only.
If the socket does not match the appliance
plug, it must be replaced by the manufacturer,
a service agent or similarly qualified persons in
order to avoid a hazard.
A specially grounded plug has been connected
to the power cable of your appliance. This
plug should be used with a specially grounded
socket of 13 amperes. If there is no such socket
in your house, please have one installed by an
authorised electrician.
This appliance can be used by children
aged from 8 years and above and persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given supervision
or instruction concerning use of the appliance
in a safe way and understand the hazards
involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be
made by children without supervision.
If the supply cord is damaged, it must be
replaced by the manufacturer, an authorised
service agent or similar qualified persons, in
order to avoid a hazard.
This appliance is not intended for use at
altitudes exceeding 2000 m.

Electrical Safety

WARNING: When positioning the
n
appliance, ensure the supply cord is not
trapped or damaged.
WARNING: DO NOT locate multiple
n
portable socket-outlets or portable
power supplies at the rear of the
appliance.
DO NOT use plug adapter.
n
WARNING; RISK OF FIRE / FLAMMABLE MATERIALS
ArtNo.000-0001
Warning triangle
The plug must be accessible after
•
installation.
The operating voltage for your appliance is
•
220-240 V at 50Hz.
Connections to the mains supply should be
•
in accordance with local regulations.
Insert the plug into a socket with an
•
efficient ground connection. If the socket
has no ground contact or the plug does
not match, we recommend you consult a
qualified electrician for assistance.
The appliance MUST be connected with a
•
properly installed fused socket. The power
supply (AC) and voltage at the operating
point must match with the details on the
name plate of the appliance (the name
plate is located on the inside left of the
appliance).
The appliance must be plugged into an
•
earthed socket.
The plug MUST be accessible after the
•
appliance has been positioned.
The appliance is supplied with a standard
•
three-pin plug, of which the one for
grounding should never be removed.
Hold the plug, not the electrical cable,
•
when unplugging the appliance.
Make sure that the appliance does not trap
•
the electric cable.
DO NOT step on the cable.
•
3