Local Logging; Real - Time Display - Extreme Networks Summit Summit1 Installation And User Manual

Table 10-3: Fault Log Subsystems
Subsystem
Telnet
VLAN
Port
¥ Message Ñ The message contains the log information with text that is speciÞc to the
problem.
L L
OCAL
The Switch maintains 1,000 messages in its internal log. You can display a snapshot of
the log at any time by using the command
show log {<priority>} {<subsystem>}
where the following is true:
¥
priority
(more critical). Priorities include critical, warning, and informational. If not speciÞed,
informational priority messages and higher are displayed.
¥
subsystem
subsystem. Subsystems include Syst, STP Brdg, SNMP, Telnet, VLAN, and Port. If
not speciÞed, all subsystems are displayed.
R -
EAL TIME
In addition to viewing a snapshot of the Switch log, you can conÞgure the Switch to
maintain a running real-time display of log messages on the console. To turn on the log
display, enter the following command:
enable log display
To conÞgure the log display, use the following command:
config log display {<priority>} {<subsystem>}
If
priority
subsystem
S S I
UMMIT WITCH NSTALLATION AND
Description
Information related to Telnet login and configuration
performed by way of a Telnet session.
VLAN-related configuration information.
Port management-related configuration. Examples
include port statistics and errors.
OGGING
Ñ Filters the log to display message with the selected priority or higher
Ñ Filters the log to display messages associated with the selected Switch
D
ISPLAY
is not speciÞed, only messages of critical priority are displayed. If the
is not specified, all subsystems are displayed.
U G
SER UIDE
S L
WITCH OGGING
10-9