TABLE OF CONTENTS 1. FIRST STEPS 1.1 Inserting a SIM card 1.2 Inserting the battery 1.3 Charging your phone 1.4 Switching on your phone 1.5 Using the keyboard 1.6 Understanding the battery charge level 2. DAILY USES 2.1 Launching a call 2.2 Opening your call log 2.3 Writing an SMS 2.4 Adding a contact...
1. FIRST STEPS First, make sure your phone is powered off. If not, long press the red key to switch it off 1.1 Inserting a SIM card Remove the battery cover. Insert the MicroSIM card as indicated on the image below. WARNING: If you have a NanoSIM, you need to use a MicroSIM adaptater.
1.3 Charging your phone To charge your phone, place it on its cradle as indicated below. 1.4 Switching on your phone Press and hold the red key to switch on the phone.
1.5 Using the keyboard upper right key green key red key silence mode (long press) To see the menus of the phone, press the validation key. Use the navigation pad to move across the menus.
1.6 Understanding the battery charge level To see the battery charge level, refer to the battery icon in the upper right corner. The battery level is displayed as such: If the battery is low in charge, the phone notifies it via a message on the screen.
Page 8
2.1.2 Calling a contact Select a contact. Press the validation key to access the contact card. Press the navigation key Press to launch to select the number the call. called. It appears grayed out on selection.
2.2 Opening your call log Use the navigation To see the details of a call, pad to select the call select the contact with the navigation pad in the list and press the validation key. Then select Call details.
2.3 Writing an SMS Press the upper left Type in the recipient key and select New number or name if you message in the menu. have saved its number in your Contacts list. Type your message. Use the navigation pad to select the arrow and press the validation key to send the message.
2.4 Adding a contact Select Create new Select the storage contact. location. Fill in the form. Select Save with the navigation pad and press the validation key..
2.5 Calling your voicemail Press the upper left key Select Voicemail, and select Settings. and then Advanced Settings. Select Setup. Select Voicemail number and type your carrier voicemail default number. Note: Once the voicemail number set up, press and hold the "1" key from the idle screen to directly call your voicemail.
2.6 Using speakers Once in a call, you can use the speakers by selecting the icons Speaker with the navigation pad. Press again to stop using the speakers. 2.7 Using earphones Plug your earphones to the jack plug of your phone. To hang up a call, press the button on the wire of your earphones.
3. SETTINGS 3.1 Choosing your language Select System in the Select Languages. menus. Select Add a language and select the desired language in the list.
3.2 Setting the ringtone Select Sound in the Select Phone Ringtone. menus. Use the navigation pad to go through the list. Select a ringtone and press the validation key to apply the change.
3.3 Choosing your wallpaper Select Display in the Select Wallpapers. menus. Select the storage Select an image in location, Gallery or the list and press the Wallpapers. validation key.
Need help?
Do you have a question about the Homephone 4G and is the answer not in the manual?
Questions and answers
el telefono se apaga solo **** frecuencia que puede ser
Eltelefono se apaga solo **** frecuencia que puede ser
The MOBIWIRE Homephone 4G operates on a processor frequency of 1.1 GHz.
This answer is automatically generated
to turn off the light
To turn off the light on the MobiWire HomePhone 4G, press and hold the red key to switch off the phone.
This answer is automatically generated