Advertisement
10. When cleaning solution comes from
the spray gun, keep holding the trigger
and aim the spray gun into the side of the
waste container.
11. Trigger the gun until the fluid coming
out of the gun is clear. You may need to
empty the waste container and continue
flushing.
12. Turn the PRIME/SPRAY knob to
PRIME and trigger gun once more to re-
lieve pressure.
15. Cleanup for Oil-based materials
1. Lock the gun and remove spray tip as-
sembly. Submerge suction set into a
bucket with appropriate cleaning solu-
tion.
Bucket with cleaning solution
3. While pulling the gun trigger, turn the
pump ON (l), and turn the PRIME/
SPRAY knob to SPRAY to purge mater-
ial from the hose back into the original
container.
Keep holding trigger throughout the
next steps.
4. When cleaning solution comes from
the spray gun, keep holding the trigger
and aim the spray gun into the side of
the waste container (ground gun with
a metal container if flushing with
flammable solvent).
5. Trigger the gun until the fluid coming
out of the gun is clear. You may need
to dispose and obtain new cleaning
solution.
6. Turn the PRIME/SPRAY knob to PRIME and
trigger gun once to relieve pressure.
https://www.XPOtool.com
The Tool Experts
spray into
waste container
spray material into original container
Move on to Cleaning the Spray Gun
Components.
2. Place a waste container next to the ori-
ginal material container. Aim the spray gun
into the side of the original material con-
tainer and hold the trigger.
- Hold trigger
- Turn pump ON(I)
- Turn PRIME/SPRAY knob to SPRAY
Spray cleaning solution
into waste container
Spray material into original container
Move on to 16. Cl eaning the Suction Set .
Artikel 63003
Seite 17
04
2021-1
Advertisement
