Hitachi DH 52ME Service Manual page 10

• Mounting the cylinder and retainer sleeve
Avoid the Oil Seal <17>
from being turned up.
Engage the Lock Sleeve <39>
with the Cylinder Case <18>.
Engage the Lock Sleeve <39> with the Clutch <41>
Engage the clutch with the bevel gear.
Pay attention to the direction of the Retainer Damper
Washer <24> and Damper Washer <31>.
Insert position of the Lock Spring Washer <37>
[101] {107}
<18>
<34> <35>
<40>
<38>
<39>
<37>
.
Engage the Clutch <41>
with the Cylinder <33>.
<33>
Insert from the convex side.
<41>
<42> <44>
Position the notch downward.
-9-
Position the slider groove upward.
<45>
<46>
Position the concave portions
sideways.