Before Using For The First Time; Making Settings For Initial Start-Up; Rinse Aid System; Rinse Aid - Bosch SPU6IMS01A User Manual

aus Before using for the first time

Before using for the first time

Before using for the
first time
Configure the settings for initial start-
Before using for the first time
up.
Making settings for initial
start-up
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Tip: Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
→ "Home Connect quick start",
Page 33
Requirement: "The appliance has
been installed and connected."
→ Page 13
"Add rinse aid." → Page 24
1.
"Switch on the appliance."
2.
→ Page 30
"Set the amount of rinse aid to be
3.
dispensed." → Page 25
"Add detergent" → Page 25.
4.
Start the "Programme with the
5.
highest cleaning temperature"
→ Page 18 without tableware.
To remove any marks from water
or other residues, we recommend
you operate the appliance without
tableware before using it for the
first time.
Tip: You can change this setting and
other "Basic settings" → Page 32 at
any time again.
24

Rinse aid system

Rinse aid system
You can use the rinse aid system
Rinse aid system
and rinse aid to get tableware and
glasses rinsed perfectly without
marks.

Rinse aid

For optimum drying results, use rinse
aid.
Only use rinse aid for domestic dish-
washers.
Adding rinse aid
If the rinse aid refill indicator lights
up, top up with rinse aid. Only use
rinse aid for domestic dishwashers.
Press the catch on the lid of the
1.
dispenser for rinse aid
⁠ .
Add rinse aid up to the max mark.
2.
If rinse aid spills out, remove it
3.
from the tub.
and lift
2
1
max