Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bosch SPU2IKW02S
Summary of Contents for Bosch SPU2IKW02S
- Page 1 Dishwasher SPU2IKW02S [en] User manual...
-
Page 2: Table Of Contents
Table of contents Safety .......... 4 Knife shelf........ 22 General information...... 4 Basket heights........ 22 Intended use........ 4 Before using for the first time .. 22 Restriction on user group.... 4 Performing the initial configura- Safe installation ........ 5 tion.......... 22 Safe use ........... 6 Damaged appliance ...... 8 Water softening system.... - Page 3 Customer Service...... 53 Terminate programme.... 32 Product number (E-Nr.), produc- Switching off appliance .... 32 tion number (FD) and consecut- Basic settings........ 33 ive numbering (Z-Nr.) ..... 54 Overview of basic settings ..... 33 AQUA-STOP guarantee .... 54 Home Connect ...... 34 Technical specifications.... 54 Home Connect quick start ..... 35 Information regarding Free and Open Source Software .... 55...
-
Page 4: Safety
en Safety Safety Please read the safety information to ensure that you use the ap- pliance safely. General information You can find general information about this instruction manual here. ¡ Read this instruction manual carefully. Only this will ensure you use the appliance safely and efficiently. ¡... -
Page 5: Safe Installation
Safety en Cleaning and user maintenance must not be performed by chil- dren unless they are being supervised. Keep children under the age of 8 years away from the appliance and power cable. Safe installation Follow these safety instructions when installing the appliance. WARNING ‒ Risk of injury! Improper installation may cause injury. -
Page 6: Safe Use
en Safety WARNING ‒ Risk of electric shock! Cutting through the supply hose or immersing the Aqua-Stop valve in water is dangerous. ▶ Never immerse the plastic housing in water. The plastic housing on the supply hose contains an electric valve. ▶ Never cut through the supply hose. The supply hose con- tains electric power cables. - Page 7 Safety en ¡ Highly caustic alkaline or highly acidic cleaning agents in con- junction with aluminium parts in the interior of the appliance may cause explosions. ▶ Never use highly caustic alkaline or highly acidic cleaning agents, in particular commercial or industrial products, in conjunction with aluminium parts (e.g.
-
Page 8: Damaged Appliance
en Safety ¡ If the insulation of the power cord is damaged, this is danger- ous. ▶ Never let the power cord come into contact with hot appli- ance parts or heat sources. ▶ Never let the power cord come into contact with sharp points or edges. -
Page 9: Risk To Children
Safety en Risk to children Follow the safety instructions if there are children in your home. WARNING ‒ Risk of suffocation! ¡ Children may put packaging material over their heads or wrap themselves up in it and suffocate. ▶ Keep packaging material away from children. ▶... - Page 10 en Safety WARNING ‒ Risk of injury! Children may get their fingers caught in the slots of the tablet collecting tray and injure themselves. ▶ Keep children away from the appliance when open. WARNING ‒ Risk of suffocation! Children may become trapped in the appliance and suffocate. ▶...
-
Page 11: Preventing Material Damage
Preventing material damage en ¡ Modified or damaged water hoses Preventing material damage Preventing material dam- may result in material damage and damage to the appliance. Never kink, crush, modify or cut ▶ through water hoses. Follow these instructions to prevent Only use the water hoses sup- material damage to your appliance, ▶... -
Page 12: Environmental Protection And Saving Energy
en Environmental protection and saving energy ¡ Unsuitable cleaning agents may AquaSensor damage the appliance. The AquaSensor is an optical meas- Do not use a steam cleaner. ▶ uring device (light barrier) which So as not to scratch the finish ▶ measures the turbidity of the rinsing on the appliance, do not use water. -
Page 13: Installing And Connecting The Ap- Pliance
Installation and connection en ¡ Warranty Drainage connection ¡ Installation material Connect your appliance to drainage ¡ Steam guard plate connection so dirty water is dis- ¡ Mains cable charged via the wash cycle. ¡ Quick reference guide Installing the drainage Installing and connecting the ap- connection pliance... -
Page 14: Electrical Connection
en Installation and connection Electrical connection Connect your appliance to the power supply. Connecting the appliance to the electricity supply Notes ¡ Follow the Safety instructions → Page 5. ¡ Connect the appliance to alternat- ing current only, in the range of 220 - 240 V and 50 Hz or 60 Hz. ¡... -
Page 15: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarise yourself with the parts of your appliance. Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with E number and FD number → Page 54. -
Page 16: Controls
en Familiarising yourself with your appliance Bottom basket → Page 21 Bottom basket Filter system → Page 38 Filter system Dispenser for special salt Add the special salt to the dispenser for special salt. → "Water softening system", Page 23 Tablet collecting tray During the wash cycle tablets automatically fall out of the detergent dispenser into the tablet collecting tray where they can fully dissolve. - Page 17 Familiarising yourself with your appliance en 5 6 7 Switching on the appliance → Page 31 ON/OFF button and reset button Switching off the appliance → Page 32 Terminating the programme → Page 32 Programmes → Page 18 Programme button Programmes → Page 18 Programmes Water softening system → Page 23 Special salt refill indicator Rinse aid system → Page 25 Rinse aid refill indicator Home Connect → Page 34...
-
Page 18: Programmes
en Programmes Programmes Programmes You can find an overview of the pro- ted. The running time will change if grammes that can be selected here. the rinse aid system is switched off Different programmes, which can be or rinse aid needs to be added. found on the control panel of your The consumption values can be appliance, are available depending... -
Page 19: Information For Test Institutes
Programmes en Programme Programme sequence Additional func- tions Tableware: Particularly gentle: ExtraDry ¡ Cleaning delicate table- ¡ Pre-Rinse SpeedPerfect Glass 40° → "Additional ware, cutlery, temperat- ¡ Cleaning 40 °C ure-sensitive plastics, functions", ¡ Intermediate rinse glasses and stemware in Page 20 ¡ Final rinse 60 °C the stemware basket. -
Page 20: Additional Functions
en Additional functions Top basket Additional functions Additional functions Arrange cups and glasses in the top You can find an overview of the addi- basket. tional functions that can be selected here. Different additional functions, which can be found on the control panel of your appliance, are available depending on the appliance configur- ation. -
Page 21: Bottom Basket
Features en Check that the basket is level on both sides. Cutlery basket Slide the basket back in. Arrange cutlery in the cutlery basket, always without sorting it and with the Bottom basket sharp points downwards. Arrange pans and plates in the bot- tom basket. -
Page 22: Etagere
en Before using for the first time If you do not need the cutlery shelf, Etagere you can fold it up. Use the cutlery shelf and space un- derneath for small cups and glasses Knife shelf or for large items of cutlery, e.g. Use the shelf for knives and long wooden spoons or serving cutlery. -
Page 23: Water Softening System
Water softening system en Tip: You can change these settings Water softening system Water softening system and other Basic settings → Page 33 at any time. Hard water leaves limescale on the tableware as well as the washing tank and parts of the appliance may become blocked. -
Page 24: Special Salt
en Water softening system 0, 1, 2 or 3 LEDs will light up ac- Do not use table salt. cordingly. Add the special salt to the dis- → "Overview of water hardness set- penser. tings", Page 23 The factory setting is level 1 (LED A → Page 16). -
Page 25: Regeneration Of The Water Softening System
Rinse aid system en ¡ The water hardness is 0 - 8 °E. Additional power consumption in 0.05 You do not need to use special salt. The consumption values specified Press . are laboratory measurements determ- To open the appliance settings, ined in accordance with the currently press for 3 seconds. -
Page 26: Setting The Amount Of Rinse Aid
en Detergent To save the settings, press for 3 seconds. Switching the rinse aid system If you find the rinse aid refill indicator irritating, e.g. when using combined detergents with a rinse aid compon- ent, you can switch the rinse aid sys- tem off. - Page 27 Detergent en starch and remove protein. Oxygen- Separate detergents based bleaching agents are generally Separate detergents are products used to remove coloured marks, e.g. that do not contain components other tea or ketchup. than detergent, e.g. powder deter- Note: Follow the manufacturer's in- gent or liquid detergent.
-
Page 28: Unsuitable Detergents
en Detergent ¡ The function of rinse aid is limited Unsuitable detergents with combined detergents. You will Do not use detergent which could generally get better results using cause damage to the appliance or rinse aid. present a risk to health. ¡... -
Page 29: Tableware
Tableware en Damage to glass and tableware Avoid damage to glass and table- ware. Cause Recommendation The following table- Only put tableware in ware is not dish- the dishwasher if it is washer-safe: marked as dish- ¡ Items of cutlery washer-safe by the and tableware manufacturer. -
Page 30: Arrange Tableware
en Tableware To save resources, do not pre- Cause Recommendation rinse tableware under running wa- The water temperat- Select a programme ter. ure of the programme with lower temperat- Observe the following when arran- is too high. ures. ging tableware: After the programme –... -
Page 31: Removing Tableware
Basic operation en If you do not perform any actions Removing tableware on the appliance for 10 minutes, the appliance will automatically WARNING switch off. Risk of injury! Hot tableware can cause burns to the Setting a programme skin. When hot, tableware is sensitive to shock, may crack and can result in To adjust the wash cycle to the soil- injury. -
Page 32: Starting The Programme
en Basic operation Starting the programme Terminate programme Press To end a programme early or to ▶ switch from a programme that has a The programme has ended when already started, you will need to can- no indicators on the controls light cel it first. -
Page 33: Basic Settings
Basic settings en Basic settings Basic settings You can configure the appliance to meet your needs. Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Selection Description Water hardness Scale with 4 levels Set the water hardness. → "Setting the water softening system", Page 23 Rinse aid disp. -
Page 34: Home Connect
en Home Connect Press repeatedly until the If LED A, LED B and LED C are lit, LEDs show the right value. remote start is permanently activ- ated. If LED A → Page 16 is not lit, Extra The factory setting is level 2 (LED Dry is switched off. -
Page 35: Home Connect Quick Start
Home Connect en Tips ¡ Please consult the documents sup- plied by Home Connect. ¡ Please also follow the instructions in the Home Connect app. Note: Please note the safety precau- tions in this instruction manual and make sure that they are also ob- Follow the instructions in the served when operating the appliance Home Connect app. -
Page 36: Remote Diagnostics
You can use this function to update the software of your appliance, e.g. Declaration of Conformity for optimisation, troubleshooting or safety-relevant updating. Robert Bosch Hausgeräte GmbH The Home Connect app informs you hereby declares that the appliance about available software updates. with Home Connect functionality... -
Page 37: Cleaning And Servicing
Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.bosch-home.com/ mend cleaning your appliance at reg- store or from customer service. ular intervals. Machine Care is a programme which... -
Page 38: Filter System
en Cleaning and servicing Phase Removal of Detergent Placement Food remnants and deposits Machine cleaner Detergent dispenser To ensure optimum cleaning perform- Remove any coarse soiling in the ance, the programme doses the de- interior with a damp cloth. tergents independently of each an- Clean the filters. -
Page 39: Cleaning Spray Arms
Cleaning and servicing en Cleaning filters Soiling in the dishwashing water may block the filters. After each wash check the filters for residue. Turn the coarse filter anticlockwise and remove the filter system . Check that no foreign objects ‒ fall into the sump. - Page 40 en Cleaning and servicing Pull up the lower spray arm to re- move. Check the outlet nozzles on the spray arms for blockages under running water and remove any for- eign bodies. Insert the lower spray arm. a The spray arm clicks into position. Insert the upper spray arms and screw firmly in place.
-
Page 41: Troubleshooting
Troubleshooting en Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... -
Page 42: Washing Results
en Troubleshooting Fault Cause troubleshooting Display for water supply Check the water connection for lights up leaks. Restore the power supply. Switch the appliance on. Wastewater hose is blocked Reposition the wastewater hose or kinked. without kinks. Remove residues. Siphon connection is still Check the connection to the siphon ▶... - Page 43 Troubleshooting en Fault Cause troubleshooting Tableware is not dry. Programme or programme Select a programme with drying, ▶ option has no drying phase, e.g. intensive, strong or ECO pro- gramme. → Page 18 or the drying phase is too brief. Some option buttons decrease the drying result, e.g varioSpeed.
- Page 44 en Troubleshooting Fault Cause troubleshooting Appliance interior still wet Not a fault. The condensa- No action required. after wash cycle. tion drying principle causes water droplets in the tub – they are indeed desirable here. The moisture in the air condenses on the inside walls, runs off and is pumped out.
- Page 45 Troubleshooting en Fault Cause troubleshooting Detergent residue in the ap- Lid of the detergent dis- Arrange tableware in the top basket pliance penser is blocked by items tableware so the tab collecting tray of tableware parts and will is not obstructed by tableware. → "Arrange tableware", Page 30 not open.
- Page 46 en Troubleshooting Fault Cause troubleshooting Change your detergent → Page 26. Stubborn white coatings are Detergent substances are ▶ present on tableware, inside deposited there. These coat- Clean the appliance mechanically. ▶ the appliance or the door. ings cannot generally be re- moved with chemicals. The hardness range is set in- Set the Water softening system to ▶...
- Page 47 Troubleshooting en Fault Cause troubleshooting Coloured coatings (blue, yel- not always be possible to com- low, brown) that are difficult pletely remove deposits but they or impossible to remove are are harmless to health. present inside the appliance or on stainless steel table- ware.
- Page 48 en Troubleshooting Fault Cause troubleshooting Removable streaks are Tableware has been pre- Only remove large remnants of food ▶ present on glasses, glass- cleaned too intensely. The and do not prerinse tableware. ware with a metallic appear- sensors chose a weaker pro- ance and cutlery.
-
Page 49: Home Connect Problem
Troubleshooting en Fault Cause troubleshooting Excessive formation of foam Detergent or appliance care Change the brand of detergent. ▶ occurs. product used causes excess- ive foaming. Home Connect problem Fault Cause troubleshooting Connection to home net- WLAN on router is not act- Check the wireless network con- ▶... -
Page 50: Mechanical Damage
en Troubleshooting Fault Cause troubleshooting → "Terminate programme", Water is left in the appliance ▶ at the end of the pro- Page 32 gramme. Appliance cannot be Software update is taking Wait until the software update has ▶ switched on or operated. place. finished. -
Page 51: Noise
Troubleshooting en Fault Cause troubleshooting Appliance door cannot be When closed, the appliance door, closed. its decor or attached parts should not knock against adjacent cabin- ets or the worktop. Lid on the detergent dis- Detergent dispenser or lid Remove detergent residue. ▶... -
Page 52: Clean Wastewater Pump
en Transportation, storage and disposal Clean wastewater pump Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. WARNING Risk of injury! Sharp and pointed objects or frag- ments of glass may block the waste a The pump cover clicks into posi-... -
Page 53: Transporting The Appliance
Customer Service en Cut through the power cord. Transporting the appliance Dispose of the appliance in an en- To avoid damage to the appliance, vironmentally friendly manner. empty it before transporting. This appliance is labelled in ac- Note: Always transport the dish- cordance with European Direct- washer upright to prevent residual ive 2012/19/EU concerning... -
Page 54: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)
en Technical specifications Function-relevant genuine spare parts AQUA-STOP guarantee according to the corresponding Eco- In addition to warranty claims against design Order can be obtained from the seller under the purchase agree- Customer Service for a period of at ment and in addition to our manufac- least 10 years from the date on turer's warranty, we offer compensa- which your appliance was placed on... -
Page 55: Information Regarding Free And Open Source Software
Technical specifications en Information regarding Free and Power consumption Off mode/standby mode: 0.20 W Open Source Software Left-on mode: 0.20 W This product includes software com- Networked standby: ponents that are licensed by the 2.00 W copyright holders as free software or Time in left-on mode: open source software. - Page 56 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.
Need help?
Do you have a question about the SPU2IKW02S and is the answer not in the manual?
Questions and answers