Table of Contents
Advertisement
N
otebook User Guide
3.
To remove the disc, press on the center spindle and pull up the disc from
the side until the disc snaps out of the spindle lock.
If the eject function is disabled by software or a power failure occurs, the
Emergency Eject Hole allows you to manually remove a CD from the
reader.
4.
To close the optical drive, simply push the CD tray inside. The optical
drive LED will activate when the disc is detected. Wait until the LED has
turned off and then start to read the disc.
How to care the Optical Disks (CDs, DVDs, etc.)
When you handle CDs and DVDs, pay attention to the following guidelines:
•
Always pick up the disk by its edges.
•
Avoid scratching or soiling either side of the disk.
•
Do not write with the hard ball-point pen or apply labels on either side of
the disk.
52
Advertisement
Table of Contents
