Samsung WF393BTPA Series User Manual page 36

troubleshooting
ERROR IMAGE
nF1
OE
E2
tE
3E
AE
SF
SUdS
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
36_ troubleshooting
WF395BTPA-03145B-02_EN_20120829.indd 36 WF395BTPA-03145B-02_EN_20120829.indd 36
MEANING
This error code appears when the
water temperature is 50 °C or above
for 8 seconds or longer in the Wool and
Delicate course.
Water detected over the safe water
level.
Jammed key.
Temperature sensor problem.
Motor problem.
Communication error between SUB
PBA and MAIN PBA
System error
Too many suds are detected during the
washing session.
The unit is put on hold until the suds
are reduced. Then, the unit will go back
into the operation.
When it fi nishes washing, "End" and
"SUdS" codes will blink in turn.
SOLUTION
Please connect the hot/cold water hose
connection correctly.
Call for service
Call for service
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
Call for service
Call for service
Reduce the amount of detergent you
use.
2012-08-31 2012-08-31 12:36:25 12:36:25