Special Salt And Rinse Aid; Filters - Siemens SX Series Instruction Manual

Hide thumbs Also See for SX Series:
Table of Contents

Advertisement

en Cleaning and maintenance
Never use a steam cleaner to clean
your dishwasher. The manufacturer
is not liable for any consequential
damage.
Regularly wipe the front
of the appliance and fascia with a damp
cloth; water and a little washing up
liquid are adequate. Do not use
sponges with a rough surface
or abrasive detergents, as these could
scratch the surfaces.
Stainless steel appliances: To prevent
corrosion, avoid using sponge cloths
or wash them out thoroughly several
times before using for the first time.

Special salt and rinse aid

Top up the salt and/or rinse aid as soon
as the refill indicators on the fascia P
and H are lit or there is a prompt on
the front display * ):.
* depending on the features of your
dishwasher
36

Filters

The filters 1Z keep large foreign
objects in the rinsing water away from
the pump. hese foreign objects may
occasionally block the filters.
The filter system consists of
a coarse filter
a flat fine filter
a microfilter
After each washing cycle check
1.
the filters for residue.
Unscrew filter cylinder as illustrated
2.
and take out filter system.
Remove any residue and clean
3.
filters under running water.
Re-install filter system in reverse
4.
sequence and ensure that the arrow
marks are opposite each other after
closing the filter system.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sn578s00tgSn series

Table of Contents