In Daily Use; Damage; Disposal - Siemens SX Series Instruction Manual

Install built-under or
■
integratable appliances only
under continuous worktops
which have been screwed to
adjacent cupboards to
ensure stability.
Do not install the appliance
■
near heat sources (radiators,
heat storage tanks, cookers
or other appliances which
generate heat) and do not
install under a hob.
Please note that the
■
insulation material of the
dishwasher power cord may
melt next to heat sources
(e.g. heating / hot water
installations) or hot
appliance parts. Make sure
that the power cord of the
dishwasher never comes into
contact with heat sources or
hot appliance parts.
After installing the appliance,
■
ensure that the plug is easily
accessible. ~ "Electrical
connection" on page 51
For some models:
■
The plastic housing on the
water connection contains an
electric valve. The supply
hose contains electrical
connection cables. Do not
cut through the supply hose.
Do not immerse the plastic
housing in water.

In daily use

Read and observe the safety
information and instructions for
use on the packaging for
cleaning and rinsing agents.

Damage

The appliance may be
■
repaired and opened up by a
technician only. To do this,
disconnect the appliance
from the power supply. Pull
out the mains plug or switch
off the fuse. Turn off the tap.
If the appliance is damaged,
■
especially the control panel
(cracks, holes, broken
buttons), or the door function
is impaired, stop operating
the appliance. Pull out the
mains plug or switch off the
fuse. Turn off tap, call
customer service.

Disposal

Make redundant appliances
1.
unusable to prevent
subsequent accidents.
Dispose of the appliance in
2.
an environmentally friendly
manner.
Safety instructions en
7