Maintenance; Troubleshooting Guide - FUNAI LT7-M22BB Owner's Manual

MAINTENANCE

Panel Cleaning
• If the LCD panel should require cleaning, wipe it with a cotton
or soft cloth. Before cleaning the panel, disconnect the power
cord.
Servicing
• Should your unit become inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts inside.
Turn the unit off, unplug the power cord, and take the unit to a
Service Centre for servicing.

TROUBLESHOOTING GUIDE

Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities.
Before arranging for service, check these items. It could save you time and money.
QUICK SERVICE CHECK LIST
Try a new channel, if OK, then possibly due to poor channel reception.
Is unit plugged in?
Power at outlet?
Is unit's [Q (standby-on)] on?
Is antenna connected to terminal on the back of the unit?
If outside antenna is being used, check for broken wire.
Check for local interference.
Turn off with [Q (standby-on)] and then turn it on after about a minute.
Adjust "Colour" control.
Adjust "Contrast" & "Brightness" control.
Check batteries in remote control.
Surrounding temperature is too low.
Life of the Back Light is approximately 50,000 hours. Ask the Service Centre to replace.
It is quality of the LCD Panel.
Enter the default password "4737".
POSSIBLE REMEDY
Cabinet Cleaning
• Wipe the front panel and other exterior surfaces of the unit with
a soft cloth immersed in lukewarm water and wrung dry.
• Never use a solvent or alcohol. Do not spray insecticide liquid
near the unit. Such chemicals may cause damage and
discoloration to the exposed surfaces.
× × ×
×
×
× × × ×
× ×
×
×
×
29
× × × × × × × ×
×
×
× × × × ×
× × × × × × ×
× × × × ×
×
× ×
× ×
× ×
×
×
×
EN