Advertisement

Quick Links

PRECAUTIONS
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the apparatus's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the apparatus.
POWER SUPPLY
The main power supply is engaged when the main plug is
plugged in a 220-240 V , 50 Hz AC outlet. To operate the
unit, press [
(standby-on)] to turn on the unit.
WARNING: LIVE PARTS INSIDE.
DO NOT REMOVE ANY SCREWS.
EN
CAUTION
1)
Do not attempt to open the cabinet. There are no user
serviceable parts inside. Refer all servicing to qualified
service personnel.
2)
Slots and openings in the cabinet and the sides or
bottom are provided for ventilation. To ensure reliable
operation and to protect the unit from overheating, these
openings must not be blocked or covered.
Avoid installation in enclosed spaces such as bookcases
unless proper ventilation is provided.
3)
Keep the unit away from radiators and other heat
sources.
4)
Do not push objects of any kind into the unit through
the cabinet slots or openings as they could touch
electrically live parts or short circuit parts resulting in a
fire or electric shock.
5)
To prevent fire or shock hazard, do not expose this unit
to dripping or splashing, no objects filled with liquids,
such as vases, should be placed on the unit.
6)
Use the unit on a horizontal (flat) surface only.
7)
Do not place any combustible objects on the unit
(candles, etc.).
8)
The LCD panel used in this product is made of glass.
Therefore, it can break when the product is dropped or
applied with impact. Be careful not to be injured by
broken glass pieces in case the LCD panel breaks.
The LCD panel is a very high technology product with
921,600 thin film transistors, giving you fine picture
details. Occasionally, a few non-active pixels may appear
on the TV screen as a fixed point of blue, green or red.
Please note that this does not affect the performance of
your product.
9)
Disconnect the mains plug to switch off when the unit
becomes faulty or not in use.
10) The mains plug shall remain readily operable.
11) Read the manual instructions to ensure correct and safe
installation and interconnection of the unit in
multimedia systems.
12) Keep a distance of 20 cm around the ventilation
openings of the unit.
13) Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the
like.
Do not place the unit on the furniture that is capable of
being tilted by a child or an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or
even death.
2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LT7-M32BB and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for FUNAI LT7-M32BB

  • Page 1: Off Precautions

    PRECAUTIONS CAUTION WARNING: Do not attempt to open the cabinet. There are no user serviceable parts inside. Refer all servicing to qualified TO REDUCE THE RISK OF FIRE OR service personnel. ELECTRIC SHOCK, DO NOT EXPOSE THIS Slots and openings in the cabinet and the sides or APPARATUS TO RAIN OR MOISTURE.
  • Page 2: Table Of Contents

    TABLE OF CONTENTS PRECAUTIONS ..............................2 THINGS TO DO FOR THE FIRST TIME ......................4 OPERATING CONTROLS AND FUNCTIONS ....................5 PREPARATION FOR USE ..........................7 SETUP FOR USE ............................10 OPERATIONS ..............................11 OTHER SETTINGS ............................15 MAINTENANCE...............................27 TROUBLESHOOTING GUIDE ........................27 SPECIFICATIONS ............................28 DECLARATION OF CONFORMITY ........................29 Features A Note about Recycling •...
  • Page 3: Things To Do For The First Time

    THINGS TO DO FOR THE FIRST TIME ATTACHING THE STAND You need to attach the stand to the unit to display upright. Make sure the front and rear of the stand match the proper direction. Place the unit face down onto Hang the hook under the Drive Phillips pan screws in the soft stuff such as a cloth on a...
  • Page 4: Operating Controls And Functions

    OPERATING CONTROLS AND FUNCTIONS All operations described are based on the use of the remote control. Some operations can be carried out using the buttons on the control panel. CONTROL PANEL REMOTE CONTROL ASPECT (standby-on) (text) Press to turn on or off (standby) the unit. Press to display the teletext information.
  • Page 5 REAR PANEL 26. PC-IN (RGB) input jack 34. PC-IN AUDIO input jack Connect a VGA cable (not supplied) to the monitor jack of Connect a mini-plug audio cable (not supplied) to the audio a PC. line out jack of a PC. 27.
  • Page 6: Preparation For Use

    To HDMI (HDMI 1 or HDMI 2 or HDMI 3) jack Antenna Connection Dear Customer, By connecting an HDMI cable to your Funai LCD TV, you have to use only a certified HDMI cable to guarantee a sufficient immunity against parasitic frequency radiation.
  • Page 7 [COMPONENT CONNECTION] [VIDEO CONNECTION] RCA component video connection offers better picture quality. RCA video connection offers standard picture quality. 1) Connect the component video output jack (Y, Pb, Pr) of your 1) Connect the video output jack of your video device and the video device and the COMPONENT video (Y, Pb, Pr) input VIDEO input jack of this unit.
  • Page 8 Cable Management [PC CONNECTION] Keep the cables through this holder to avoid tangle them. If you connect this unit and your PC, you can use this unit as a computer monitor. Rear of this unit 1) Connect the monitor jack of your PC and the PC-IN (RGB) jack of this unit.
  • Page 9: Setup For Use

    SETUP FOR USE Initial Setting You need to set the followings to use the unit appropriately for the first time you turn on the unit. 1) Press [ (standby-on)] to turn on the unit. • “Initial Setup” language menu will appear. Note: The settings may be limited by the location you purchased.
  • Page 10: Operations

    OPERATIONS Watching a TV Programme Switching the Input Mode You can switch the input mode to TV mode or external input mode. To select a channel Press [ ] repeatedly to select your desired channel. 1) Press [INPUT]. • “Select Input” menu will appear. Press [the Number buttons] to enter a channel number then [OK] for quicker access.
  • Page 11 Sound Select TV Screen Information You can see the broadcasting information. 1) Press [SOUND] to display the currently selected audio language and the number of available languages. 1) Press [ (information)]. 2) Press [SOUND] repeatedly to cycle through the available •...
  • Page 12 EPG (Electronic Programme Guide) You can easily find a channel or see the detailed channel information. EPG gives you scheduled information of the TV programmes. 1) Press [GUIDE]. • EPG will appear. Television TV guide Viewing date: Thu Current time: 21:16:27 19:00 Hit Music...
  • Page 13 Changing the TV Screen Display Mode For HD (High Definition) video signal You can select your favourite TV screen size. “Full” Press [ASPECT] repeatedly to switch the TV screen display “Auto” mode. For SD (Standard Definition) video signal “Zoom” “Expand” “Sidebar”...
  • Page 14: Other Settings

    OTHER SETTINGS Picture Adjustment “Colour Temperature” 3) Press [K / L] to select “Colour Temperature”. You can adjust the picture settings according to your personal preference. These settings are automatically stored after exiting the 4) Press [s / B] to select the setting (“Cool, Normal, Warm”) picture menu.
  • Page 15 Advanced Picture Adjustment “Flesh Tone” You can set to activate the flesh colours or not. You can adjust the detailed picture settings according to your personal preference. 4) Press [K / L] to select “Flesh Tone”. 1) Press [MENU] to display the menu. 5) Press [s / B] to select the setting (“On, Off ”) you want.
  • Page 16 PC Settings Sound Adjustment You can adjust the PC screen position, clock and phase. Make sure your PC is connected. You can adjust the sound settings according to your personal preferences. These settings are automatically stored after exiting 1) Press [MENU] to display the menu. the sound menu.
  • Page 17 Country Setting “Auto Volume Control” Note: You may not select the country depending on the You can set to keep a constant loudness differential between the location you purchased. TV commercials and the programs. 3) Press [K / L] to select “Auto Volume Control”. You can select the channels according to the country you select.
  • Page 18 Audio Language Selection Auto Scan You can scan the channels receivable in your area automatically. You can select the main language. 1) Press [MENU] to display the menu. 1) Press [MENU] to display the menu. 2) Press [K / L] to select “TV”, then press [OK]. 2) Press [K / L] to select “TV”, then press [OK].
  • Page 19 Analogue Manual Scan Update Scan You can adjust an analogue channel individually. You can scan the updated channels automatically. 1) Press [MENU] to display the menu. 1) Press [MENU] to display the menu. 2) Press [K / L] to select “TV”, then press [OK]. 2) Press [K / L] to select “TV”, then press [OK].
  • Page 20 Channel Skip Channel Sort When using [ / ], the channel you selected will be skipped. You can change the channel order. 1) Press [MENU] to display the menu. 1) Press [MENU] to display the menu. 2) Press [K / L] to select “TV”, then press [OK]. 2) Press [K / L] to select “TV”, then press [OK].
  • Page 21 Channel Edit “Frequency” You can edit channel information. 1) Press [MENU] to display the menu. 7) Press [the Number buttons] to enter a frequency you want, then press [OK]. 2) Press [K / L] to select “TV”, then press [OK]. 3) Press [K / L] to select “Channel”, then press [OK].
  • Page 22 Fine Tune Time Zone You can set the time zone according to the resident area. 1) Press [MENU] to display the menu. 1) Press [MENU] to display the menu. 2) Press [K / L] to select “TV”, then press [OK]. 2) Press [K / L] to select “Setup”, then press [OK].
  • Page 23 Subtitle Settings Teletext You can change the teletext settings. 1) Press [MENU] to display the menu. 1) Press [MENU] to display the menu. 2) Press [K / L] to select “Setup”, then press [OK]. 2) Press [K / L] to select “Setup”, then press [OK]. 3) Press [K / L] to select “Subtitle”, then press [OK].
  • Page 24 C.I. (Common Interface) Parental Setting This unit is equipped with a C.I. slot. You can enjoy additional You can set the maturity rating, lock the channel, or set the services with this function, for example Pay TV. The access password. restrictions menu will appear on the TV screen when a CI module is installed.
  • Page 25 Software Download “Maturity Rating” You can set the parental rating to avoid watching an inappropriate You can update the current software when this unit detects a new programme for your children. version of software. 4) Press [K / L] to select “Maturity Rating”, then press [OK]. 1) When this unit receives software updates automatically, the 5) Press [K / L] to select “Parental Rating”.
  • Page 26: Maintenance

    MAINTENANCE Panel Cleaning Cabinet Cleaning • If the LCD panel should require cleaning, wipe it with a cotton • Wipe the front panel and other exterior surfaces of the unit with or soft cloth. Before cleaning the panel, disconnect the power a soft cloth immersed in lukewarm water and wrung dry.
  • Page 27: Specifications

    SPECIFICATIONS General Specifications Other Specifications Television system: PAL B/G TV standard Remote control: Digital encoded infrared light PAL D/K TV standard system SECAM L TV standard Power requirements: AC 220-240 V , 50 Hz SECAM L' TV standard Power consumption: 130W (Standby: less than 1W) SECAM B/G TV standard LCD:...
  • Page 28: Declaration Of Conformity

    EN61000-3-2: 2006 Class D Low Voltage Directive: 2006 / 95 / EC EN61000-3-3: 1995+A1: 2001+A2: 2005 EN60065: 2002+A1: 2006 Funai Electric (Polska) Sp. z o.o. EN55022: 2006 Class B ul. Inżynierska 1 EN55024: 1998+A1: 2001+A2: 2003 Nowa Sól, 67-100 / Poland...

Table of Contents