Huawei BTS3902E WCDMA Hardware Description page 61

BTS3902E WCDMA
Site Maintenance Guide
2.
Step 10 Reconnect all cables to the BTS3902E and seal all vacant ports by waterproof caps.
Step 11 Power on the BTS3902E according to the instructions in
Step 12 Check whether the BTS3902E is working properly by observing the status of the indicators
labeled O/E or O. For details about the status of the indicators, see BTS3902E Indicators in
BTS3902E WCDMA Hardware Description.
Step 13 Go to
on whether the laptop or USB storage device is used.
l
1.
Issue 06 (2014-05-16)
Figure 3-7 Removing the BTS3902E
(1) Positioning screw
Install and waterproof a new BTS3902E.
Perform the following operations on the LMT
Perform the following operations on the LMT:
In the Software Update window, select Downloading the Data Configuration File,
Download NodeB Software Package, and Download by Configuration to download the
configuration file and NodeB software package, and select Effective Data Configuration
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Replacing the BTS3902E
(2) Positioning pins
2.1 Powering On a
or use the USB storage device
BTS3902E.
depending
12