Huawei BTS3902E WCDMA Hardware Description page 18

BTS3902E WCDMA
Hardware Description
Indicator
ALM
ACT
VSWR
O/E
O
Issue 09 (2014-05-16)
Color Status
Red Steady on
Blinking (on for
1s and off for 1s)
Off
Green Steady on
Blinking (on for
1s and off for 1s)
Red Off
Blinking red (on
for 1s and off for
1s)
Steady red
Blinking red (on
for 0.125s and off
for 0.125s)
Green Steady on
Blinking (on for
0.125s and off for
0.125s)
Off
Green Steady on
Blinking (on for
0.125s and off for
0.125s)
Off
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Alarms are generated, and the BTS3902E
must be replaced.
Alarms are generated. The alarms may be
caused by the faults on the related boards or
ports. Therefore, the necessity for
BTS3902E replacement is uncertain.
No alarm is generated.
The BTS3902E is working properly with TX
channels enabled.
The BTS3902E is working properly with TX
channels disabled.
No VSWR alarm is generated.
VSWR alarms are generated on the
ANTB_TX/RX port.
VSWR alarms are generated on the
ANTA_TX/RX port.
VSWR alarms are generated on the
ANTA_TX/RX and ANTB_TX/RX ports.
The OPT1 or ETH port is connected
properly.
The OPT1 or ETH port is transmitting or
receiving data.
The OPT1 or ETH port is connected
improperly.
The OPT0 port is connected properly.
The OPT0 port is transmitting or receiving
data.
The OPT0 port is connected improperly.
2 BTS3902E Overview
11