error Type
LeD
unbalance
dc
error
Foaming
SUdS
Detected
System error
SF
For uSA
LCD
- As laundry causes this error, check the laundry.
- Find the reason for the unbalance and solve it as
directed in the user manual.
- This occurs when too much foaming is detected. It is
also displayed while foaming is removed. When the
removal is finished, the normal cycle proceeds. "Sud"
or "SUdS" is displayed when too much foaming is
detected and "End" is displayed when the removal of
the foaming is finished.
(This is one of the normal operations. It is an error for
preventing non-sensing faults.)
- In case of EEPROM deteced
-
- In case of PBA problem
-
System Error
Causes
Troubleshooting _ 23
Remarks