Cardo Systems FREECOM1+ Manual page 10

Table of Contents

Advertisement

If pairing is not completed within 2 minutes, the unit automatically returns to Standby mode.
To cancel the pairing process:
On your unit, press
for 2 seconds.
The LED stops flashing.
4.2 STARTING/ENDING INTERCOM CALLS
You can initiate Bluetooth intercom calls with other riders, including non-Cardo riders.
To start or end communication with a rider or passenger:
: Tap
.
4.2.1 RECEIVING BLUETOOTH INTERCOM CALLS
If another paired unit calls you via Bluetooth intercom, the call begins instantly.
4.3 RESETTING BLUETOOTH INTERCOM PAIRING
Resetting Bluetooth intercom pairing also resets all Bluetooth device pairing.
To reset Bluetooth intercom pairing:
1. Press
for 5 seconds. The LED flashes red.
2. Press
and
for 2 seconds.
The LED flashes purple 5 times slowly, confirming that pairing has been reset.
4.4 SHARING MUSIC AND RADIO
You can share music and FM radio with a passenger or other rider. Music sharing is more suitable for
rider/passenger combinations, whereas FM radio is also intended for rider/rider combinations.
Music and radio can be shared with only one passenger/rider.
Bluetooth intercom calls are disabled when sharing music.
FM radio sharing opens a Bluetooth intercom call automatically.
If you paired your unit to two mobile phones, music will be shared from the mobile phone through which
you last played music.
When sharing FM radio, either passenger/rider can change station while the Bluetooth intercom call
remains open.
When you stop sharing FM radio, the Bluetooth intercom call remains open and the FM radio continues to
play independently on each passenger/rider's unit.
When you stop sharing music, the music continues to play on your unit only.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FREECOM1+ and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Freecom2+

Table of Contents