Program Screen - Radio Thermostat CT30 Operation Manual

PROGRAM Screen

for your home HVAC system with out a central controller. Press and hold PROG for 10 sec to access
it. After that it is displayed when you press the PROG button.
Set Time Slot
Touch this area to set the
Time Slot you want to program.
Set Program Time
Touch this area to set the
time of day you want each
time period to start.
Left arrow goes back,
right arrow goes forward.
[Touch and hold for fast set.]
Copy
Touch this area to copy
current day's program
to the next day.
The stand alone PROGRAM screen sets the CT30 control
Set Program Day
Touch this area to set the day of the week
you want to program.
[See page 8 for details]
Return HOME
When programming is complete
touch this to run your program and
return to the HOME screen.
AM
MORN
COPY DAY
PROGRAM
Temp Up / Temp Down
Touch these to raise and
lower each Target Temp.
[Touch and hold for fast set.]
PG PG
F
HEAT
4 4