Electrical Information - King Industrial KAC-1200 Instruction Manual

High-output 3 speed air cleaner with remote control

Hide thumbs

Table Of Contents

Table of Contents

ALL ADJUSTMENTS OR REPAIRS MUST BE DONE WITH THE AIR CLEANER DISCONNECTED FROM THE POWER SOURCE.

FAILURE TO COMPLY MAY RESULT IN SERIOUS INJURY!

GENERAL INFORMATION- 120V single phase operation

This air cleaner comes with a 120V single phase motor.

WARNING: YOUR AIR CLEANER MUST BE CONNECTED TO A

110V-120V, 1 PHASE ELECTRICAL SUPPLY. FAILURE TO

CONNECT IN THIS WAY CAN RESULT IN INJURY FROM SHOCK OR

FIRE.

This Air Cleaner is intended for use on an electrical circuit that has an

outlet and a plug which looks like the one illustrated in Fig.1.

WARNING: DO NOT USE A TWO-PRONG ADAPTOR FOR THEY

ARE NOT IN ACCORDANCE WITH LOCAL CODES AND

ORDINANCES. NEVER USE IN CANADA.

GROUNDING

Your Air Cleaner must be properly grounded. Not all outlets are

properly grounded. If you are not sure if your outlet is properly

grounded, have it checked by a qualified electrician. If it should

malfunction or breakdown, grounding provides a path of least

resistance for electric current, to reduce the risk of electric shock. This

Air Cleaner is equipped with a cord having an equipment-grounding

conductor and grounding plug. The plug must be plugged into an

appropriate outlet that is properly installed and grounded in accordance

with all local codes and ordinances.

WARNING: TO MAINTAIN PROPER GROUNDING OF YOUR AIR

CLEANER, DO NOT REMOVE OR ALTER THE GROUNDING PRONG

IN ANY MANNER.

WARNING: IF NOT PROPERLY GROUNDED, THIS AIR CLEANER

CAN CAUSE ELECTRICAL SHOCK, PARTICULARLY WHEN USED

IN DAMP LOCATIONS. TO AVOID SHOCK OR FIRE, IF THE POWER

CORD IS WORN OR DAMAGED IN ANY WAY, HAVE IT REPLACED

IMMEDIATELY.

EXTENSION CORDS

The use of any extension cord will cause some loss of power. Use the

table (Fig.2) to determine the minimum wire size (A.W.G-American Wire

Gauge) extension cord needed. Use only 3-wire extension cords which

have 3-prong grounding type plugs and 3-hole receptacles which

accept the tool's plug.

For circuits that are further away from the electrical circuit box, the wire

size must be increased proportionately in order to deliver ample voltage

to the Air Cleaner motor. Refer to Fig.2 for wire length and size.

TURNING AIR CLEANER ON/OFF

To manually turn your Air Cleaner On, press the On/Speed button (A)

Fig.3. Continue to press the On/Speed button to toggle through the 3

different speeds. To manually turn Air Cleaner Off, press the Off button

(B).

This Air Cleaner can also be turned On/Off, change speed and put a

timer using the supplied remote control, see instructions further in this

manual.