Table of Contents
Advertisement
1. KNOW YOUR TOOL. Read and understand the owners
manual and labels affixed to the tool. Learn its application and
limitations as well as its
2. GROUND THE TOOL. This tool is equipped with an approved
3-conductor cord and a 3-prong grounding type plug to fit the
proper grounding type receptacle. The green conductor in the
cord is the grounding wire. NEVER connect the green wire to
a live terminal.
3. KEEP GUARDS IN PLACE. Keep in good working order,
properly adjusted and aligned.
4. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit
of checking to see that keys and adjusting wrenches are
removed from tool before turning it on.
5. KEEP WORK AREA CLEAN. Cluttered areas and benches
invite accidents. Make sure the floor is clean and not slippery
due to wax and sawdust build-up.
6. AVOID DANGEROUS ENVIRONMENT. Don't use power tools
in damp or wet locations or expose them to rain. Keep work
area well lit and provide adequate surrounding work space.
7. KEEP CHILDREN AWAY. All visitors should be kept a safe
distance from work area.
8. MAKE WORKSHOP CHILD-PROOF. -with padlocks, master
switches or by removing starter keys.
9. USE PROPER SPEED. A tool will do a better and safer job
when operated at the proper speed.
10. USE RIGHT TOOL. Don't force the tool or the attachment to do
a job for which it was not designed.
11. WEAR PROPER APPAREL. Do not wear loose clothing,
gloves, neckties or jewelry (rings, watch) because they could
get caught in moving parts. Non-slip footwear is recommended.
Wear protective hair covering to contain long hair. Roll up long
sleeves above the elbows.
SPECIFIC SAFETY INSTRUCTIONS FOR YOUR AIR CLEANER
1. DO NOT ATTEMPT TO REMOVE OR REPLACE THE FILTER(S)
WHILE THE MACHINE IS IN OPERATION. MAKE SURE AIR
CLEANER IS DISCONNECTED FROM THE POWER SOURCE.
2. DO NOT OPERATE THE AIR CLEANER WITHOUT THE
FILTERS IN PLACE TO AVOID EXPOSURE TO ROTATING
PARTS AND OVERLOADING THE MOTOR.
3. THE USE of filters and attachments which are not recommended
may result in product damage or the risk of personal injury.
4. When suspending the Air Cleaner from the ceiling MAKE
CERTAIN the hardware is securely anchored into a wood structure.
Always keep a minimum of 7 feet between bottom of Air Cleaner
and the floor surface to allow for adequate head clearance. Also,
use only properly sized chain to prevent the tool from falling.
5. TO REDUCE THE RISK OF ELECTRICAL SHOCK, do not
expose to water or rain, and do not lift the Air Cleaner by the power
cord. DO NOT use the power cord as a hanging device.
6. When used in the portable application, MAKE CERTAIN the Air
Cleaner is adequately supported, or securely clamped to the work
surface to eliminate any potential for movement or damage from
falling.
7. ALWAYS WEAR ADEQUATE EYE PROTECTION.
8. WHEN NOT IN USE, BE CERTAIN TO STORE AIR CLEANER IN
A SAFE LOCATION TO ELIMINATE THE POTENTIAL OF
DAMAGE TO THE POWER CORD OR TRIPPING HAZARDS.
9. MAINTAIN TOOLS IN TOP CONDITION. Keep filters clean for
GENERAL SAFETY INSTRUCTIONS
FOR POWER TOOLS
specific potential hazards.
12. ALWAYS WEAR SAFETY GLASSES. Always wear safety
glasses (ANSI Z87.1). Everyday eyeglasses only have impact
resistant lenses, they are NOT safety glasses. Also use a face
or dust mask if operation is dusty.
13. DON'T OVERREACH. Keep proper footing and balance at all
times.
14. MAINTAIN TOOL WITH CARE. Keep tools sharp and clean for
best and safest performance. Follow instructions for lubricating
and changing accessories.
15. DISCONNECT TOOLS. Before servicing, when changing
accessories or attachments.
16. AVOID ACCIDENTAL STARTING. Make sure the switch is in
the ''OFF'' position before plugging in.
17. USE RECOMMENDED ACCESSORIES. Consult the manual
for recommended accessories. Follow the instructions that
accompany the accessories. The use of improper accessories
may cause hazards.
18. NEVER STAND ON TOOL. Serious injury could occur if the tool
tips over. Do not store materials such that it is necessary to
stand on the tool to reach them.
19. CHECK DAMAGED PARTS. Before further use of the tool, a
guard or other parts that are damaged should be carefully
checked to ensure that they will operate properly and perform
their intended function. Check for alignment of moving parts,
breakage of parts, mounting, and any other conditions that may
affect its operation. A guard or other parts that are damaged
should be properly repaired or replaced.
20. NEVER LEAVE MACHINE RUNNING UNATTENDED. Turn
power ''OFF''. Don't leave any tool running until it comes to a
complete stop.
optimum
performance. Follow instructions for changing and
cleaning filters.
10. DANGER: DO NOT use this machine to filter any metal dust.
Combining wood and metal dust can create an explosive hazard.
This Air Cleaner is intended to be used to filter non-explosive
atmospheres only.
11. IF YOU ARE NOT thoroughly familiar with the operation of the Air
Cleaner, obtain advice from your supervisor, instructor or other
qualified person.
12. WARNING: DO NOT operate your Air Cleaner until it is
completely assembled and installed according to the instruction
manual.
13. PLACE POWER CORD IN A SAFE LOCATION TO ELIMINATE
TRIPPING HAZARDS.
14. USE FACE OR DUST MASK AND EYE PROTECTION.
WARNING: The dust generated by certain woods and wood
products can be hazardous to your health. Always operate
machinery in well-ventilated areas and provide for proper dust
removal.
15. WARNING: TO AVOID A POTENTIALLY DANGEROUS
SITUATION, DO NOT USE AIR CLEANER TO DISSIPATE
FUMES OR SMOKE. This Air Cleaner is intended for use in non-
explosive, non-metallic atmospheres where only dry airborne dust
is present.
Advertisement
Table of Contents
