Mounting The Cameras - Night Owl AHD10 Series User Manual

Cameras, additional cables, power adapters and
splitters only included in certain security kits. Check
the product packaging for detailed kit contents.
Make sure all cameras are working prior to mounting by
connecting them as described in the section above. Once all
cameras are confirmed to be fully operational, you can run
the cables and mount the cameras in their final locations.
4.3

Mounting the Cameras

Camera distance from DVR.
The further the camera is from the DVR
or monitor, the higher the chances
of signal degradation. The camera's
power supply should be located
as near to the camera as possible
when the distance exceeds 200 ft.
as the power level will drop over
extended distances resulting in video degradation.
Do not place near high voltage wires or other sources of electrical interference.
Electrical interference will degrade the quality of the signal.
Place camera out of reach to avoid vandalism.
Avoid direct exposure to weather. Do not place the camera where rain or snow will
hit the lens directly or where the sun or bright light shines directly into the lens.
Your camera is weatherproof, but it will not work when submerged in water. Ensure
that all power and video connections are not directly exposed to water and are
protected from the elements.
Mounting surface. The mounting surface must hold at least four times the
camera's total weight. To mount your cameras:
1. Locate a camera and choose a location where you would like to mount
the camera.
18
Connect all cameras locally before final placement
to ensure that all components function properly.
AHD10 Series User's Manual