Welder Specifications; Components And Use - Ultrasonic P500 Operation & Maintenance Manual

WELDER SPECIFICATIONS

Power Requirements:
110-240 VAC
Output Frequency:
40 kHz
Amplitude Range:
Adjustable by horn design
Dimensions:
H13.50" x W17.00" x D9.00"
Power Supply Weight:
13 lb (5.90 kg)
Compact Hand Piece Weight:
1 lb (.45 kg)
Cable Length:
10' (3.05 m)

COMPONENTS AND USE

Lever:
Start Switch (Activates the Ultrasonics).
Tip Installation:
Clean the mating surfaces. Make sure the M8 x 1.25 mm
stud is tight in the horn (30-35 in/lb). Always use open
end wrenches on the wrench flats! Make sure the horn is
tight to the driver (converter).
3