INTRODUCTION ATTENTION: This manual and the engineering information it contains, is proprietary and is The model P100 is a portable 40 kHz, 100 watt, provided to our customers for the sole purpose of hand held ultrasonic welder used for plastics operating and maintaining the Ultrasonic Poultry assembly.
WELDER SPECIFICATIONS COMPONENTS AND USE Power Requirements: Push Button: 110-240 VAC Activates the ultrasonics. Output frequency: Nose Cover: 40 kHz Always install nose cover before using handgun. Amplitude Range: Tip Installation: Adjustable by horn design Clean the mating surfaces. Make sure the M6 x 1 x 20 mm stud is tight in the horn (30-35 in/lb).
The carrier, upon acceptance of the shipment, tion manual for future reference. If the Ultrasonic assumed responsibility for its safe delivery. Claims Welding System is used in a manner contrary...
QUICK START INSTRUCTIONS Getting Started/How to Use 1. Place the tip onto the belt to be welded and apply light pressure 2. Still applying light pressure, press the red button and hold light pressure for 2-3 seconds 3. Release the switch and apply higher pressure –...
PERFORATED EGG BELT – 1.3mm Other Tips Are Available For Different Other Tips Are Available For Different Thickness Materials Thickness Materials P150 Travel Case P100 P100 PERFORATED EGG BELT – 1.3mm PERFORATED EGG BELT – 1.3mm PERFORATED EGG BELT – 1.3mm P100 PERFORATED EGG BELT –...
To All tooling and ultrasonic horns are warranted for a arrange for an exception to the warranty, present all period of one year. Ultrasonic Poultry Systems will...
Page 9
SISTEMAS ULTRASÓNICOS DE SOLDADURA DE CINTAS M A N U A L D E O P E R A C I Ó N & M A N T E N I M I E N T O www.ULTRASONICPOULTRYSYSTEMS.com...
INTRODUCCION ATENCIÓN: Este manual y la información técnica que contiene es propiedad de Ultrasonic El modelo P100 es una soldadora de mano, Poultry Systems, y se entrega a nuestros clientes portátil de 40 kHz, 100 watt, usada para con el único propósito de operar y realizar el soldar plásticos.
ESPECIFICACIONES DEL SOLDADOR COMPONENTES Y USO Energía: Pulsador: 110-240 VAC Activa el ultrasonido. Frecuencia de salida: Cubierta: 40 kHz Siempre coloque la cubierta antes de utilizar la pistola. Rango de Amplitud: Consejo de Instalación: Ajustable según diseño del sonotrodo Limpie las superficies que van a estar en contacto. Asegúrese que el perno M6 x 1 x 20 mm se encuentre Dimensiones: firme en el sonotrodo (30-35 pulg./lb.).
• Nunca opere la fuente de potencia a menos que de entregar 60 Hz a 110 volt u opcionalmente esté conectada a la pistola manual (convertidor). 220 volt. Contacte a Ultrasonic Poultry Systems • Nunca sujete nada a la punta e indique la ficha o conector correcto según su región.
QUICK START INSTRUCTIONS Comienzo/Cómo Usar 1. Coloque la punta sobre la cinta a soldar y APLIQUE UNA LIGERA PRESIÓN 2. Aún manteniendo esa ligera presión, presione el botón rojo y MANTENGA LA PRESIÓN por 2-3 segundos 3. Libere el botón y APLIQUE UNA PRESIÓN ALGO MAYOR –...
Other Tips Are Available For Different PERFORATED EGG BELT – 1.3mm PERFORATED EGG BELT – 1.3mm Thickness Materials Thickness Materials P150 Carcasa de Viaje P100 P100 PERFORATED EGG BELT – 1.3mm PERFORATED EGG BELT – 1.3mm PERFORATED EGG BELT – 1.3mm P100 PERFORATED EGG BELT –...
Los equipos que, Durante el periodo de garantía, Ultrasonic Poultry a nuestro entender, muestren evidencia de dichos Systems decidirá, si reparar o reemplazar sin costo daños serán inadmisibles de recibir servicio bajo...
Page 16
ULTRASONIC POULTRY SYSTEMS 6160 Seeds Road, Grove City, OH 43123 info@ultrasonicpoultrysystems.com office: 614.549.0627 www.ULTRASONICPOULTRYSYSTEMS.com...
Need help?
Do you have a question about the P100 and is the answer not in the manual?
Questions and answers