Cooling Fan; Accessories; Before Using The Appliance For The First Time; Setting The Clock - Bosch HBC84H500 Instruction Manual

Setting
1, 2, 3 Grill settings

Cooling fan

Your appliance has a cooling fan. The cooling fan switches on
during operation. The hot air escapes above the door.
The cooling fan continues to run for a certain time after
operation.

Accessories

Before using the appliance for the first time

Here you will find everything you need to do before using your
oven to prepare food for the first time. First read the section on
Safety information.

Setting the clock

Once the appliance is connected, three zeros and the
symbols light up in the display. Set the clock.
À 0
Press the or button.
@ A
1.
Default value @ : 12:00
Default value : 23:59
A
Use the or button to set the clock.
@ A
2.
Press the 0 button.
3.
The time is set.
Note: In order to reduce the energy consumption of your
appliance in standby, you can hide the clock. Read about this
in the Changing basic settings section.
Use
1 = low
2 = medium
3 = high
Caution!
Do not cover the ventilation slots. Otherwise, the appliance will
overheat.
Notes
The appliance remains cool during microwave operation. The
■
cooling fan will still switch on. The fan may run on even when
microwave operation has ended.
Condensation may appear on the door window, interior walls
■
and floor. This is normal and does not adversely affect
microwave operation. Wipe away the condensation after
cooking.
Turntable
As a surface for the wire rack.
Food which particularly requires a lot of heat from underneath can
be prepared directly on the turntable.
The turntable can turn clockwise or anti-clockwise, and is cut
resistant. You can cut pizza into slices on the turntable itself.
Never use the microwave without the turntable.
■
The turntable can withstand max. 5 kg.
■
The turntable must turn when using all types of heating.
■
Lower wire rack
For the microwave and for baking and roasting in the oven.
Higher wire rack
For grilling, e.g. steaks, sausages and for toasting bread.
As a support for shallow dishes.
Fitting the turntable
As shown in the figure, place the turntable with rollers "A", onto
the turntable drive coupling "B" in the centre of the cooking
compartment floor.
The turntable must sit straight on the driver.

Heating up the oven

To remove the new cooker smell, heat up the oven when it is
empty and closed. One hour with
Ensure that no packaging remnants have been left in the
cooking compartment.
Use the function selector to set
1.
Set the temperature to 180 °C using the temperature
2.
selector.
Press the n button.
3.
The oven begins to heat up.
After an hour, switch off the oven. To switch off, turn the
function selector to the off position.

Cleaning the accessories

Before you use the accessories for the first time, clean them
thoroughly with hot soapy water and a soft dish cloth.
3 Hot air at 180 °C is ideal.
Hot air.
3
29